Platform - Assemble
Parts and Specification Information
Show/hide table
Illustration 1 | g03844852 |
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Personal injury or death can occur from heavy components falling during removal or installation. Properly support the component with a suitable lifting device during removal or installation. |
Show/hide table
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information. |
Show/hide table
Item | Part Number | Description | Qty | Specification | Approximate Weight |
1 | 444-8781 | Handrail As | 1 | May be temporarily secured to the platform when lifting the platform onto the main frame to reduce lifting | |
2 | 5P-2566 | Bolt | 10 | ||
3 | 5P-1076 | Hard Washer | 10 |
- Use a suitable lifting device to position the handrail assembly on top of the radiator cover.
- Secure handrail assembly (1) to the radiator cover with ten bolts (2), then hard washers (3).
Show/hide table
Illustration 2 | g03844903 |
View of the front of the platform |
Caterpillar Information System:
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
C4.4 and C7.1 Engines Data Link Configuration Status - Test
PM820, PM822, and PM825 Cold Planer Rotor Drive Clutch Bearings - Lubricate
120 and 120 AWD Motor Grader Safety Messages
120 and 120 AWD Motor Grader Monitoring System
C32 Marine Engines Electronic Control Module - Remove and Install - Hazardous Location
G3516 TA Engine Test ECM Mode
3512C Generator Set Engine Auxiliary Water Pump - Remove and Install
3412 Generator Set Sensor Signal (Analog, Passive) - Test
G3600 A4 Engines Nitrogen Oxide Sensor - Calibrate
C15 Generator Set Electronic Modular Control Panel 4 (EMCP 4)
120 and 120 AWD Motor Grader Rollover Protective Structure (ROPS) - Inspect
3512C Generator Set Engine Engine Oil Cooler - Remove and Install
794 AC Off-Highway Truck Field Assembly Stairway - Install
G3500H 50Hz Generator Sets Product Installation
G3500H 50Hz Generator Sets General Maintenance Information
G3500H 50Hz Generator Sets Coolant (NGEC) - Change
G3500H 50Hz Generator Sets Generator Set Alignment - Check - Generator Sets
G3500H 50Hz Generator Sets Overhaul (In-Frame)
3412 Generator Set Sensor Supply - Test
3512C Generator Set Engine Engine Oil Cooler - Disassemble
3512C Generator Set Engine Engine Oil Cooler - Assemble
G3600 A4 Engines Engine Stopping
3512C Generator Set Engine Engine Oil Pump - Remove and Install