Engine Oil Pump - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 207-1601 | Rubber Lubricant | - |
Start By:
- Remove fuel transfer pump.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1), bolts (2), and clamps (3).
- Remove bolt (4) and bracket (5).
Show/hide table
Illustration 2 g03845408 - Remove bolts (6), bolts (7), flange (8), and adapter (9).
Show/hide table
Illustration 3 g03845426 - Remove bolts (12), outlet elbow (11), tube assembly (10), and tube assembly (13).
Show/hide table
Illustration 4 g03845455 - Remove bolts (16), bolts (15), engine oil pump (14), and the O-ring seal.
Show/hide table
Illustration 1 | g03845385 |
- Install engine oil pump (14) in the reverse order of removal.
- Apply Tooling (A) to the O-ring seal of engine oil pump (14).
- Apply Tooling (A) to the bore of tube assembly (13) and outlet elbow (11).
Caterpillar Information System:
G3600 A4 Engines Engine Stopping
3512C Generator Set Engine Engine Oil Cooler - Assemble
3512C Generator Set Engine Engine Oil Cooler - Disassemble
3412 Generator Set Sensor Supply - Test
G3500H 50Hz Generator Sets Overhaul (In-Frame)
G3500H 50Hz Generator Sets Generator Set Alignment - Check - Generator Sets
G3500H 50Hz Generator Sets Coolant (NGEC) - Change
G3500H 50Hz Generator Sets General Maintenance Information
G3500H 50Hz Generator Sets Product Installation
794 AC Off-Highway Truck Field Assembly Stairway - Install
3512C Generator Set Engine Engine Oil Cooler - Remove and Install
794 AC Off-Highway Truck Field Assembly Platform - Assemble
G3600 A4 Engines Product Lifting
G3600 A4 Engines Before Starting Engine
G3600 A4 Engines Manual Stop Procedure
G3606 and G3608 Engines Prelubrication Oil Pump - Install
C32 Marine Engines Aftercooler - Remove
C32 Marine Engines Aftercooler - Install
Cat® MineStar System A5:N2 Router Setup and Configuration Guide {7008, 7605} Cat® MineStar System A5:N2 Router Setup and Configuration Guide {7008, 7605}
3412 Generator Set Shutdown - Test
3512C Generator Set Engine Engine Oil Filter Housing - Remove and Install
794 AC Off-Highway Truck Field Assembly Air Lines (Turbocharger) - Install
3412 Generator Set Speed Control (Engine Speed Switch) - Test
Energy Storage System General Information