Manual Stop Procedure
Show/hide table
注意 |
---|
带载工作后立即将发动机熄火会造成发动机过热和发动机部件的加速磨损。 涡轮增压器中部壳体温度过高将导致机油结焦故障。 涡轮增压器中间壳体的温度过高可能会损坏涡轮增压器轴承/轴系统和显著缩短涡轮增压器的使用寿命。 在发动机停机以前,让发动机逐渐冷却下来 |
- 脱离或卸载从动设备。
- 对于发电机组,断开主断路器。
- 对于工业发动机,使压缩机或泵卸载。 分离离合器(如有配备)。 将变速箱和 / 或其它动力输出附件置于 NEUTRAL(空档)位置。
注: 长期怠速会造成过量机油消耗和相关的问题。 请参阅本操作和保养手册, "发动机操作"专题(操作章节)。
- 降低发动机转速到低怠速。
注: 如果未应用冷却功能,停机前让发动机在低怠速下运行一段冷却时间 1 到 2 分钟。
注: 在避免产生爆燃的速率下卸去负载。
发动机将逐渐停下来。 在发动机停机之后,确保为发动机运行提供外部支持的所有系统是安全可靠的。 发动机停止后关掉发动机的辅助系统。
Caterpillar Information System:
G3600 A4 Engines Before Starting Engine
G3600 A4 Engines Product Lifting
3512C Generator Set Engine Engine Oil Pump - Remove and Install
G3600 A4 Engines Engine Stopping
3512C Generator Set Engine Engine Oil Cooler - Assemble
3512C Generator Set Engine Engine Oil Cooler - Disassemble
3412 Generator Set Sensor Supply - Test
G3500H 50Hz Generator Sets Overhaul (In-Frame)
G3500H 50Hz Generator Sets Generator Set Alignment - Check - Generator Sets
G3500H 50Hz Generator Sets Coolant (NGEC) - Change
G3500H 50Hz Generator Sets General Maintenance Information
G3500H 50Hz Generator Sets Product Installation
G3606 and G3608 Engines Prelubrication Oil Pump - Install
C32 Marine Engines Aftercooler - Remove
C32 Marine Engines Aftercooler - Install
Cat® MineStar System A5:N2 Router Setup and Configuration Guide {7008, 7605} Cat® MineStar System A5:N2 Router Setup and Configuration Guide {7008, 7605}
3412 Generator Set Shutdown - Test
3512C Generator Set Engine Engine Oil Filter Housing - Remove and Install
794 AC Off-Highway Truck Field Assembly Air Lines (Turbocharger) - Install
3412 Generator Set Speed Control (Engine Speed Switch) - Test
Energy Storage System General Information
3412 Generator Set Speed Control (PWM) - Test
Energy Storage System Abbreviations and Acronyms
Energy Storage System Site Considerations