Rotor Drive Clutch Bearings - Lubricate
在潤滑之前請擦拭所有油嘴。
Show/hide table
| |
| 插圖 1 | g03844682 |
打開左側檢修門。
透過轉子驅動皮帶盤找出轉子驅動系統離合器軸承的潤滑油嘴。 潤滑此油嘴。
Caterpillar Information System:
120 and 120 AWD Motor Grader Safety Messages
120 and 120 AWD Motor Grader Monitoring System
C32 Marine Engines Electronic Control Module - Remove and Install - Hazardous Location
G3516 TA Engine Test ECM Mode
3512C Generator Set Engine Auxiliary Water Pump - Remove and Install
3412 Generator Set Sensor Signal (Analog, Passive) - Test
G3600 A4 Engines Nitrogen Oxide Sensor - Calibrate
C15 Generator Set Electronic Modular Control Panel 4 (EMCP 4)
120 and 120 AWD Motor Grader Rollover Protective Structure (ROPS) - Inspect
120 and 120 AWD Motor Grader Secondary Steering - Test
120 and 120 AWD Motor Grader Tandem Breather - Clean/Replace
120 and 120 AWD Motor Grader Tandem Drive Oil Sample - Obtain
C4.4 and C7.1 Engines Data Link Configuration Status - Test
G3606 and G3608 Engines Prelubrication Oil Pump - Remove
794 AC Off-Highway Truck Field Assembly Platform - Assemble
3512C Generator Set Engine Engine Oil Cooler - Remove and Install
794 AC Off-Highway Truck Field Assembly Stairway - Install
G3500H 50Hz Generator Sets Product Installation
G3500H 50Hz Generator Sets General Maintenance Information
G3500H 50Hz Generator Sets Coolant (NGEC) - Change
G3500H 50Hz Generator Sets Generator Set Alignment - Check - Generator Sets
G3500H 50Hz Generator Sets Overhaul (In-Frame)
3412 Generator Set Sensor Supply - Test
3512C Generator Set Engine Engine Oil Cooler - Disassemble