Unit Injector Sleeve - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 372-7975 | 喷油器套筒工具 | 1 |
| E | - | Loctite 620 | - |
| F | 4C-5552 | 大号孔刷 | 1 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 彻底清洁单体喷油器套管和单体喷油器孔径。 工具 (F) 可能用于孔径。
- 将清洁的发动机机油涂抹到 O 形密封圈 (1) 上。
Show/hide table
 | |
| 图 1 | g03500578 |
- 将一薄层工具 (E) 涂敷在单体喷油器套管 (2) 外缘的表面 (Z) 。
- 使用工具 (A) 和锤子将单体喷油器套管 (2) 安装到缸盖中。
Show/hide table
 | |
| 图 2 | g03500637 |
- 有关正确的加注步骤，请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
注: 向发动机加注燃油或冷却液之前先在 21 °C (70 °F) 下使工具 (E) 粘合两小时。 温度越低，需要的固化时间越长。
End By: 安装单体喷油器。
Caterpillar Information System:
3500B and 3500C Marine Propulsion Engines Secondary ECM/Personality Module
3500B and 3500C Marine Propulsion Engines Starting Motor System
3500B Series II Marine Engines Prelubrication System
3500B and 3500C Marine Propulsion Engines Injector Solenoids
3500B and 3500C Marine Propulsion Engines Engine Speed/Timing Sensor
3500B and 3500C Marine Propulsion Engines Engine Control Switch (ECS)
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove
3500B and 3500C Marine Propulsion Engines Emergency Stop Switch
3500B and 3500C Marine Propulsion Engines Electrical Power Supply
3500B and 3500C Marine Propulsion Engines Digital Sensor Supply
3500B and 3500C Marine Propulsion Engines CAN Data Link
3500B and 3500C Marine Propulsion Engines Cat Data Link
3500B and 3500C Marine Propulsion Engines Engine Speed/Timing Sensor - Calibrate
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Alternator and Regulator
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
G3304 and G3306 Engines Camshaft - Remove
Cold Weather Recommendations for On-Highway Diesel Truck Engines Fuel System Information
3618 Engine After Stopping Engine
G3304 and G3306 Engines Camshaft - Install
G3500B Engines Compressor Bypass
G3500C and G3500E Generator Set Engines Compressor Bypass - Adjust
G3500B Engines Electronic Control System Operation
C7 On-highway Engine Air Inlet Cover - Remove and Install
G3304 and G3306 Engines Timing Gear Cover - Remove and Install