Compressor Bypass - Adjust
Show/hide table
 | |
| 图 1 | g01173633 |
(1) 轴 (2) 销 (3) 气门组件 (4) 板 (5) 联轴器 (6) 螺钉 (7) 扭转弹簧 (8) 轴 (9) 管 (10) 扭转弹簧 | |
- 确定销 (2) 与气门组件 (3) 平行，以便关闭板 (4) 。
- 组装轴 (8) 、管 (9) 及扭转弹簧 (7) 和 (10) 。将组件连到联轴器 (5) 上。
- 在上紧联轴器组件前，确保轴 (1) 完全在顺时针位置，确保销 (2) 与气门组件平行。 安装螺钉 (6) 。
(6) 螺钉
- 扭矩 ... 15 ± 1 N·m (11 ± 0.7 lb ft)
Caterpillar Information System:
G3500B Engines Compressor Bypass
G3304 and G3306 Engines Camshaft - Install
3618 Engine After Stopping Engine
Cold Weather Recommendations for On-Highway Diesel Truck Engines Fuel System Information
G3304 and G3306 Engines Camshaft - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Alternator and Regulator
3500B and 3500C Marine Propulsion Engines Engine Speed/Timing Sensor - Calibrate
C7 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install
3500B and 3500C Marine Propulsion Engines Secondary ECM/Personality Module
3500B and 3500C Marine Propulsion Engines Starting Motor System
3500B Series II Marine Engines Prelubrication System
G3500B Engines Electronic Control System Operation
C7 On-highway Engine Air Inlet Cover - Remove and Install
G3304 and G3306 Engines Timing Gear Cover - Remove and Install
3044C Industrial Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C7 On-Highway Engine Crankshaft Rear Seal - Remove
G3304 and G3306 Engines Timing Gears - Remove
G3500B Engines Start/Stop Control
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft
C15 On-Highway Engines Electronic Unit Injector - Adjust
G3304 and G3306 Engines Timing Gears - Install
C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove