Vibration Damper and Pulley - Remove and Install
- Remove the belts.
Show/hide table
Illustration 1 g00991061 - Remove bolts (2) and crankshaft vibration damper (1) from the crankshaft pulley.
Show/hide table
Illustration 2 g00991062 - Remove bolts (3) and plate (4).
- Remove crankshaft pulley (5).
- Position crankshaft pulley (5) on the crankshaft. Position plate (4) and install bolts (3). Tighten bolts (3) to a torque of
200 ± 25 N·m (148 ± 18 lb ft) .Show/hide tableIllustration 4 g00991061 - Install crankshaft vibration damper (1). Tighten bolts (2) to a torque of
55 ± 10 N·m (40 ± 7 lb ft) . - Install the belts.
Show/hide table
Illustration 3 | g00991062 |
Caterpillar Information System:
G3304 and G3306 Engines Timing Gears - Install
C15 On-Highway Engines Electronic Unit Injector - Adjust
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft
G3500B Engines Start/Stop Control
G3304 and G3306 Engines Timing Gears - Remove
C7 On-Highway Engine Crankshaft Rear Seal - Remove
3044C Industrial Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
G3304 and G3306 Engines Timing Gear Cover - Remove and Install
C7 On-highway Engine Air Inlet Cover - Remove and Install
G3500B Engines Electronic Control System Operation
G3500C and G3500E Generator Set Engines Compressor Bypass - Adjust
G3500B Engines Compressor Bypass
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3054E Industrial Engine Housing (Front) - Install
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C7 On-Highway Engine Speed/Timing Sensor - Remove and Install
G3304 and G3306 Engines Timing Gear Plate - Remove and Install
C7 On-Highway Engine Boost Pressure Sensor - Remove and Install
C7 and C9 On-Highway Engines Intermittent Low Power or Power Cutout
C7 On-Highway Engine Inlet Air Temperature Sensor - Remove and Install
G3500B Engines Engine Governing
C7 On-Highway Engine Housing (Front) - Remove
C7 On-Highway Engine Unit Injector Hydraulic Pump - Install
C7 On-Highway Engine Housing (Front) - Install