C7 On-Highway Engine Caterpillar

Speed/Timing Sensor - Remove and Install

Usage:

C7 FML

Show/hide table

NOTICE

Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.

Show/hide table




Illustration 1	g01128114

Note: The speed/timing sensors must be replaced as a pair.

(1) Torque for bolt ... 28 ± 7 N·m (21 ± 5 lb ft)

Caterpillar Information System:

C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install

3054E Industrial Engine Housing (Front) - Install

C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove

C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install

G3304 and G3306 Engines Timing Gears - Install

C15 On-Highway Engines Electronic Unit Injector - Adjust

3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft

G3500B Engines Start/Stop Control

G3304 and G3306 Engines Timing Gears - Remove

C7 On-Highway Engine Crankshaft Rear Seal - Remove

3044C Industrial Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add

G3304 and G3306 Engines Timing Gear Cover - Remove and Install

G3304 and G3306 Engines Timing Gear Plate - Remove and Install

C7 On-Highway Engine Boost Pressure Sensor - Remove and Install

C7 and C9 On-Highway Engines Intermittent Low Power or Power Cutout

C7 On-Highway Engine Inlet Air Temperature Sensor - Remove and Install

G3500B Engines Engine Governing

C7 On-Highway Engine Housing (Front) - Remove

C7 On-Highway Engine Unit Injector Hydraulic Pump - Install

C7 On-Highway Engine Housing (Front) - Install

G3304 and G3306 Engines Engine Oil Pan - Remove

C1.5 and C2.2 Engines For Caterpillar Built Marine Generator Sets Engine Design

C7 On-Highway Engine Front Cover - Remove

G3500B Engines Engine Governing