Crankshaft Rear Seal - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-8145 | Drill Bit | 1 |
B | 1U-7600 | Slide Hammer Puller | 1 |
Start By:
- Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to drill three evenly spaced holes in the crankshaft rear seal.
Show/hide table
Illustration 1 g00989088 - Use Tooling (B) to remove crankshaft rear seal (1).
Caterpillar Information System:
3044C Industrial Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
G3304 and G3306 Engines Timing Gear Cover - Remove and Install
C7 On-highway Engine Air Inlet Cover - Remove and Install
G3500B Engines Electronic Control System Operation
G3500C and G3500E Generator Set Engines Compressor Bypass - Adjust
G3500B Engines Compressor Bypass
G3304 and G3306 Engines Camshaft - Install
3618 Engine After Stopping Engine
Cold Weather Recommendations for On-Highway Diesel Truck Engines Fuel System Information
G3304 and G3306 Engines Camshaft - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Lifter Group
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Alternator and Regulator
G3304 and G3306 Engines Timing Gears - Remove
G3500B Engines Start/Stop Control
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Camshaft
C15 On-Highway Engines Electronic Unit Injector - Adjust
G3304 and G3306 Engines Timing Gears - Install
C7 On-Highway Engine Vibration Damper and Pulley - Remove and Install
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3054E Industrial Engine Housing (Front) - Install
C7 Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
C7 On-Highway Engine Speed/Timing Sensor - Remove and Install
G3304 and G3306 Engines Timing Gear Plate - Remove and Install
C7 On-Highway Engine Boost Pressure Sensor - Remove and Install