C13 Engine for Caterpillar Built Machines Caterpillar

Removal Procedure

Show/hide table



Illustration 1	g02174574

1. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the proper draining and filling procedures.

2. Disconnect tube assembly (3). Remove bolts (1 ) and elbow (2) .

Show/hide table



Illustration 2	g02174551

3. Remove bolts (4) and bolts (5). Remove manifold (6) and coupling (7) .

Show/hide table



Illustration 3	g01859093

4. Disconnect hose assembly (8). Remove hose assemblies (9). Remove bolts (10) and bolts (11). Remove oil filter base (12) and the O-ring seals.

Show/hide table



Illustration 4	g02850764

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

5. Remove plug (15), spring (14), and plunger (13) from oil filter base (12) .

Show/hide table



Illustration 5	g02850770

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

6. Remove plug (18), spring assembly (17), and valve (16) from oil filter base (12) .

Show/hide table



Illustration 6	g02850774

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

7. Remove bolt (23), seat (22), spring (21), retainer (20), and spacer (19) from oil filter base (12) .

Show/hide table



Illustration 7	g02850818

8. Use Tooling (A) to remove oil filter (26) from remote engine oil filter base (25). Remove bolts (24) and remote engine oil filter base (25) .

Show/hide table



Illustration 8	g02850820

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

9. Remove plug (29), spring (28), and plunger (27) from remote engine oil filter base (25) .

Installation Procedure

1. Install remote engine oil filter base (25) and oil filter base (12) in the reverse order of removal.

   1. Apply lubricant that is being sealed to all O-ring seals and the filters.

   2. Tighten plug (29) to a torque of 100 ± 15 N·m (74 ± 11 lb ft).

   3. Use Tooling (A) to tighten oil filter (26) to a torque of 65 ± 3 N·m (48 ± 2 lb ft).

   4. Tighten plug (18) to a torque of 100 ± 15 N·m (74 ± 11 lb ft).

   5. Tighten plug (15) to a torque of 100 ± 15 N·m (74 ± 11 lb ft).