Inlet Air Temperature Sensor - Remove and Install
Removal Procedure
- Disconnect the harness assembly from temperature (1). Remove temperature sensor (1) .
Show/hide table
 | |
| Illustration 1 | g02860316 |
Installation Procedure
- Install temperature sensor (1) in the reverse order of removal.
- Tighten temperature sensor (1) to a torque of 20 ± 3 N·m (177 ± 27 lb in).
Caterpillar Information System:
C13 Engine for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engine for Caterpillar Built Machines Pressure Sensor (ARD Combustion Air) - Remove and Install
C13 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Pan - Remove and Install
C13 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
C13 Engine for Caterpillar Built Machines Front Cover - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Flywheel - Remove and Install
C13 Engine for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Water Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Air Inlet Elbow - Remove and Install
C32 Generator Set General Maintenance Information
2013/06/06 Installing Connecting Rod Bearings in G3600, 3600 and C280 Engines {1225}
Well Service Pumps General Hazard Information
Well Service Pumps Fire Prevention and Explosion Prevention
Well Stimulation Pumps Crushing Prevention and Cutting Prevention
C27 and C32 Generator Sets Product Installation
Well Stimulation Pumps Before Operation
Well Service Pumps Operation
Well Stimulation Pumps Safety Messages
Well Stimulation Pumps Pump (Fluid End) Plunger Lube Oil Level - Check
Well Stimulation Pumps Pump (Fluid End) Plunger Lube System - Check
3512E Tier 4 Final Engines for Land Electric Drilling Oil Filter Differential Pressure Problem