Water Lines
Show/hide table
 | |
| 图 1 | g03348290 |
发动机前视图 | |
Show/hide table
| 353-9373 水管总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 4 | 5P-2569 O 形密封圈 | 装配时，采用经认可的固定剂进行固定。 |
Show/hide table
 | |
| 图 2 | g03348813 |
发动机俯视图 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 2 | 1 | 3B-2523 螺柱 | 拧紧至扭矩为 35 ± 5 N·m (26 ± 4 lb ft)。 |
| 3 | 1 | 281-0226 阀组件 | 安装深度为 1.25 ± 0.25 mm (0.049 ± 0.010 in)。 |
| 4 | 2 | 6L-7817 O 形密封圈 | 利用所要密封的润滑剂略微润滑孔。 |
Show/hide table
 | |
| 图 3 | g03348814 |
419-6897 调节器壳体组件 | |
Show/hide table
| 项目 | 数量 | 零件 | 技术规格说明 |
| 5 | 2 | 3S-9643 唇形密封 | 组装前，使用甘油或高强度/高温厌氧法兰密封胶稍微润滑密封件的运行表面。 |
| 6 | 1 | 8M-5860 杯塞 | 组装前，向螺塞上涂覆密封胶。 |
| D | - | - | 安装深度为 1.25 ± 0.25 mm (0.049 ± 0.010 in)。 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
C175-16 Locomotive Engine Flywheel - Remove and Install
C175-16 Locomotive Engine Flow Limiter - Remove and Install
C32 Marine Engines Water Lines
C32 Marine Engines Turbocharger
C32 Marine Engines Water Pump
C32 Marine Engines Water Manifold - Exhaust
C7.1 Industrial Engine Refill Capacities
C32 Marine Engines Flywheel Housing
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
C175-16 Locomotive Engine Vibration Damper - Remove and Install
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C4.4 Industrial Engine Fuel System - Prime
C175-16 Locomotive Engine Fuel Pump (High Pressure) - Remove and Install
C175-16 Locomotive Engine Crankshaft Rear Seal - Remove and Install
C175-16 Locomotive Engine Cooling System Operation
C175-16 Locomotive Engine Air Cleaner - Remove and Install
C175-16 Locomotive Engine Crankshaft Front Seal - Remove and Install
C175-16 Locomotive Engine Turbocharger - Remove and Install
C18 Locomotive Engines Engine Design