Water Lines
Show/hide table
图 1 | g03348276 |
发动机前视图 典型示例 |
Show/hide table
155-8742 水管总成 和 155-8743 水管总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 3N-8468 卡箍组件     | 使用以下步骤拧紧卡箍组件: 1. 安装弯头后,将卡箍组件的每个螺栓拧紧至扭矩为 10 ± 3 N·m (89 ± 27 lb in)。 2. 再次将每个螺栓拧紧至最终扭矩为 18.5 ± 1.5 N·m (163.7 ± 13.3 lb in)。     |
Caterpillar Information System:
C32 Marine Engines Turbocharger
C32 Marine Engines Water Pump
C32 Marine Engines Water Manifold - Exhaust
C7.1 Industrial Engine Refill Capacities
C32 Marine Engines Flywheel Housing
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Flow Limiter - Remove and Install
C175-16 Locomotive Engine Flywheel - Remove and Install
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
C32 Marine Engines Water Lines
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
C175-16 Locomotive Engine Vibration Damper - Remove and Install
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C4.4 Industrial Engine Fuel System - Prime
C175-16 Locomotive Engine Fuel Pump (High Pressure) - Remove and Install