Water Pump
Show/hide table
图 1 | g03348803 |
Show/hide table
356-1246 水泵总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 112-1579 O 形密封圈     | 用 5P-3975 橡胶润滑剂 稍涂孔。     |
2     | 1     | 9X-7371 O 形密封圈     | 组装期间,涂覆经认可的固定剂以固定 O 形密封圈。     |
Show/hide table
图 2 | g03348167 |
395-3467 水泵总成 |
Show/hide table
项目     | 数量     | 零件     | 技术规格说明     |
3     | 1     | 0S-1591 螺栓     | 拧紧至扭矩为 39 ± 3 N·m (29 ± 2 lb ft)。     |
4     | 1     | 349-2654 水泵密封件     | 使用安装工具将水泵密封件压装到水泵轴上,直到固定杯完全座入泵壳体内。     |
5     | 1     | 153-1256 唇形密封     | 用安装工具安装唇形密封件,使主密封唇朝向水泵驱动齿轮。 用压具压装唇形密封件,直到唇形密封件与壳体内表面齐平。 不要用手安装唇形密封,不要润滑密封唇。     |
B     | 1     | 135-4928 水泵轴     | 碳密封组件底座区的轴直径为 19.100 ± 0.010 mm (0.7519 ± 0.0004 in)。     |
Caterpillar Information System:
C32 Marine Engines Water Manifold - Exhaust
C7.1 Industrial Engine Refill Capacities
C32 Marine Engines Flywheel Housing
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C32 Marine Engines Turbocharger
C32 Marine Engines Water Lines
C175-16 Locomotive Engine Flow Limiter - Remove and Install
C175-16 Locomotive Engine Flywheel - Remove and Install
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
C32 Marine Engines Water Lines
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
C175-16 Locomotive Engine Vibration Damper - Remove and Install
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace