Fuel Priming Pump - Electric Fuel Priming Pump
Show/hide table
NOTICE |
---|
Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
If necessary, install a new fuel filter element to canister (5). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter (Water Separator) Element - Replace" for the correct procedure.
Show/hide table
Illustration 1 | g03348301 |
Typical example (2) Primary fuel filter base |
(1) Tighten the connectors to the following torque. ...
(3) Tighten the plugs to the following torque. ...
(4) Tighten the bolts to the following torque. ...
Caterpillar Information System:
C175-16 Locomotive Engine Temperature Sensor
C32 Marine Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
C175-16 Locomotive Engine Flywheel - Remove and Install
C175-16 Locomotive Engine Flow Limiter - Remove and Install
C32 Marine Engines Water Lines
C32 Marine Engines Turbocharger
C32 Marine Engines Water Pump
C32 Marine Engines Water Manifold - Exhaust
C7.1 Industrial Engine Refill Capacities
C175-16 Locomotive Engine Vibration Damper - Remove and Install
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C4.4 Industrial Engine Fuel System - Prime
C175-16 Locomotive Engine Fuel Pump (High Pressure) - Remove and Install
C175-16 Locomotive Engine Crankshaft Rear Seal - Remove and Install
C175-16 Locomotive Engine Cooling System Operation
C175-16 Locomotive Engine Air Cleaner - Remove and Install
C175-16 Locomotive Engine Crankshaft Front Seal - Remove and Install
C175-16 Locomotive Engine Turbocharger - Remove and Install
C18 Locomotive Engines Engine Design
Cam Bearing R&I Tool {0374, 0599, 0700, 0701, 0705, 1201, 1211} Cam Bearing R&I Tool {0374, 0599, 0700, 0701, 0705, 1201, 1211}
C175-16 Locomotive Engine Electronic Unit Injector Sleeve - Remove and Install