C175-16 Locomotive Engine Caterpillar

Removal Procedure

Show/hide table

Illustration 1	g03348299

1. Remove bolts (1) and guard assembly (2).
   Show/hide table

   Illustration 2	g03348440

2. Remove two bolts (3).
   Show/hide table

   Illustration 3	g03348441

3. Install Tooling (A). Remove remaining bolts (3).

4. Slide vibration damper (4) on Tooling (A).
   Show/hide table

   Illustration 4	g03348483

5. Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately 195 kg (430 lb). Slide vibration damper (4) to the end of Tooling (A). Remove vibration damper (4).
   Show/hide table

   Illustration 5	g03348527

6. Remove bolts (5). Separate flanges (6) and (7) from spacer (9). Remove adapter (7).

Installation Procedure

1. Install vibration damper (4) in the reverse order of removal.

   1. Apply Tooling (C) to bolts (5). Tighten bolts (5) to a torque of 76 ± 5 N·m (56 ± 3 lb ft).
      Show/hide table

      Illustration 6	g03348551

   2. Apply Tooling (D) to threads and under the head of bolts (3). Tighten bolts (3) to a torque of 700 ± 50 N·m (516 ± 37 b ft). Follow the torque tightening sequence. The four counterbored should be tightened first. Then retighten the four counterbored to a torque of 700 ± 50 N·m (516 ± 37 b ft).