C175-16 Locomotive Engine Caterpillar


Air Cleaner - Remove and Install

Usage:

C175-16 3A9

Removal Procedure



    Illustration 1g03348509

  1. Release clamps (1). Remove cover (2).


    Illustration 2g03348526


    Illustration 3g03349250

  2. Remove air cleaner element (3).

  3. Disconnect sensor connector (4).


    Illustration 4g03348541

  4. Loosen clamp (5). Disconnect hose assembly (8). Remove bolts (7) on each side of air cleaner housing (6). Remove air cleaner housing (6).

  5. Repeat Steps 1 through 4 for the remaining air cleaners.

Installation Procedure

  1. Install air cleaner (6) in the reverse order of removal.

Caterpillar Information System:

C175-16 Locomotive Engine Cooling System Operation
C175-16 Locomotive Engine Crankshaft Rear Seal - Remove and Install
C175-16 Locomotive Engine Fuel Pump (High Pressure) - Remove and Install
C4.4 Industrial Engine Fuel System - Prime
C7.1 Industrial Engine Engine Crankcase Breather Element - Replace
C175-16 Locomotive Engine Vibration Damper - Remove and Install
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
C175-16 Locomotive Engine Temperature Sensor
C32 Marine Engines Water Lines
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
C175-16 Locomotive Engine Crankshaft Front Seal - Remove and Install
C175-16 Locomotive Engine Turbocharger - Remove and Install
C18 Locomotive Engines Engine Design
Cam Bearing R&I Tool {0374, 0599, 0700, 0701, 0705, 1201, 1211} Cam Bearing R&I Tool {0374, 0599, 0700, 0701, 0705, 1201, 1211}
C175-16 Locomotive Engine Electronic Unit Injector Sleeve - Remove and Install
C175-16 Locomotive Engine Electronic Unit Injector - Remove and Install
C175-16 Locomotive Engine Cylinder Head - Remove and Install
C175-16 Locomotive Engine Valve Lifter - Remove and Install
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555} C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
C175-16 Locomotive Engine Rocker Shaft and Push Rods - Remove and Install
374F Excavator Hydraulic System General Information (Pilot System)
C175-16 Locomotive Engine Engine Oil Pan - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.