Water Manifold - Exhaust
Show/hide table
 | |
| 图 1 | g03348159 |
发动机后视图与拧紧顺序 | |
Show/hide table
 | |
| 图 2 | g03348160 |
A-A 和 B-B 视图与拧紧顺序 | |
Show/hide table
| 354-2619 水歧管总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 8 | 6L-8562 锥形锁紧螺柱 | 拧紧至扭矩为 35 ± 5 N·m (26 ± 4 lb ft)。 |
| 2 | 4 | 9X-8873 螺栓 | 按照以下步骤拧紧水歧管的螺栓： 参考图 1 和 2 以了解螺栓拧紧顺序。 1. 将螺栓 (1) 至 (6) 拧紧至扭矩为 6 ± 2 N·m (53 ± 18 lb in)。 2. 再次将螺栓 (1) 至螺栓 (6) 按数字顺序拧紧至扭矩为 47 ± 5 N·m (35 ± 4 lb ft)。 3. 将螺栓 (7) 拧紧至扭矩为 105 N·m (77 lb ft)。 4. 将螺栓 (8) 至 (12) 拧紧至扭矩为 6 ± 2 N·m (53 ± 18 lb in)。 5. 再次将螺栓 (8) 至螺栓 (12) 按数字顺序拧紧至扭矩为 105 ± 5 N·m (77 ± 4 lb ft)。 |
| 3 | 2 | 1D-4569 螺栓 | |
| 4 | 2 | 7F-3425 螺栓 | |
| 5 | 4 | 5B-2638 螺栓 | |
| 6 | 1 | 0S-1619 螺栓 | |
| 7 | 2 | 0T-0065 螺栓 | |
| 8 | 1 | 0T-0055 螺栓 | |
| 9 | 4 | 9X-8876 螺栓 | |
| 10 | 1 | 2A-1531 螺栓 | |
| 11 | 1 | 1A-0168 螺栓 | |
| 12 | 2 | 1A-5964 螺栓 | |
| 13 | 4 | 109-0076 O 形密封圈 | 在装配前，用 5P-3975 橡胶润滑剂 稍稍润滑孔。 |
Caterpillar Information System:
C7.1 Industrial Engine Refill Capacities
C32 Marine Engines Flywheel Housing
C175-16 Locomotive Engine Flywheel Housing - Remove and Install
C175-16 Locomotive Engine High Pressure Fuel Rails - Remove and Install
C175-16 Locomotive Engine Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine Fuel Transfer Pump - Remove and Install
C175-16 Locomotive Engine Gear Group (Rear) - Remove and Install
C175-16 Locomotive Engine Piston Cooling Jets - Remove and Install
XQP1100 Generator Set Fuel and the Effect from Cold Weather
C175-16 Locomotive Engine Connecting Rod Bearings - Remove and Install
C175-16 Locomotive Engine Crankshaft Main Bearings - Remove and Install
C175-16 Locomotive Engine Fuel Priming Pump - Remove and Install
C32 Marine Engines Water Pump
C32 Marine Engines Turbocharger
C32 Marine Engines Water Lines
C175-16 Locomotive Engine Flow Limiter - Remove and Install
C175-16 Locomotive Engine Flywheel - Remove and Install
C175-16 Locomotive Engine Fuel Control Valve - Remove and Install - Primary
3516C Petroleum Well Service Engine Maintenance Interval Schedule
C13, C15, and C18 Tier 4 Final Engines Magnetic Pickup
C32 Marine Engines Water Lines
C175-16 Locomotive Engine Temperature Sensor
C7.1 Engines for Caterpillar Built Machines Fuel Priming Pump - Electric Fuel Priming Pump
C175-16 Locomotive Engine Vibration Damper - Remove and Install