After Failure Only
| PRODUCT SUPPORT PROGRAM FOR REPLACING THE 380-9108 TUBING CLAMP OR 3P-9847 CLIP IN THE 437-0320 COOLING LINES GROUP ON CERTAIN 525D, 535D, 545D, AND 555D WHEEL SKIDDERS |
1380
|
PS53787 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53787" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 29Jun2018 Service Letter. Changes have been made to the Affected Product. |
The existing 380-9108 Tubing Clamp in the 437-0320 Cooling Lines Group can cause a leak in the 438-4346 Tube, or the 3P-9847 Clip can fail allowing the 438-4346 Tube to become loose on certain 525D, 535D, 545D, and 555D Wheel Skidders. |
Qty |
Part Number |
Description |
2 |
6V1867 |
CLIP |
2 |
6V1868 |
CLIP |
2 |
6V1869 |
GROMMET |
2 |
8T4195 |
BOLT-HEX HEAD |
2 |
0964883 |
NUT-SELF LOCKING |
1 |
4370312 |
TUBE |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 4% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
|
Replace the existing 380-9108 Tubing Clamp or 3P-9847 Clip with a new 6V-1867 Half Clip, 6V-1868 Half Clip, and 6V-1869 Grommet. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-4000 hrs, 0-24 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
4001-6000 hrs, 25-36 mo |
33.0% |
50.0% |
0.0% |
0.0% |
50.0% |
50.0% |
NOTE: This is a 1.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|