1995/08/14 Caterpillar


New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}

Usage:


784B (5RK) Tractors;
785B (6HK),
789B (7EK),
793B (1HL) Trucks

Description of Change: The water lines group for the 784B Tractor and 785B Truck includes a new elbow that has extra ports required for the field installation of a variable speed fan clutch and VIMS. Plugs and seals are added for use when the extra ports are not used. See Illustration 1.

The aftercooler group for 789B Truck includes a new elbow that has extra ports required for the field installation of a variable speed fan clutch and VIMS. Plugs and seals are added for use when the extra ports are not used. See Illustration 2.

The water lines group for the 793B Truck includes a new tube assembly that has extra ports required for the field installation of a variable speed fan clutch and VIMS. Plugs and seals are added for use when the extra ports are not used. See Illustration 3.

Adaptable To: Illustration 1 and Chart A identify the new component in the 1W-5223 Water Lines Group on 784B Tractors and 785B Trucks. The new 122-3194 Elbow (1), when used with the other components identified in the chart, is a direct replacement for the former 2W-6170 and 107-0759 Elbows. The former elbows are canceled.


Illustration 1. (VIEW FROM REAR OF ENGINE) Identification of new components in the 1W-5223 Water Lines Group. Brake Oil Cooler (A).

Illustration 2 and Chart B identify the new component in the 2W-3715 Aftercooler Group on 789B Trucks. The new 122-3195 Elbow (1), when used with the other components identified in the chart, is a direct replacement for the former 4W-0522 and 107-0758 Elbows. The former elbows are canceled.


Illustration 2. (VIEW FROM TOP OF ENGINE) Identification of new components in the 2W-3715 Aftercooler Group.

Illustration 3 and Chart C identify the new component in the 9Y-8889 Water Lines Group on 793B Trucks. The new 122-3192 Tube Assembly (1), when used with the other components identified in the chart, is a direct replacement for the former 7E-7545 and 105-4307 Tube Assemblies. The former tube assemblies are canceled.


Illustration 3. (VIEW FROM TOP OF ENGINE) Identification of new components in the 9Y-8889 Water Lines Group. Turbocharger Support (A). Aftercooler (B).

Caterpillar Information System:

1995/08/14 Hood Grill Improved With Enlarged Inserts{7251}
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/08/14 Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}
1995/08/14 New Indicator For Hydraulic Charge Filter Prevents Leakage{5068}
1995/08/14 New Exhaust Manifold Group Helps Prevent Exhaust Manifold Cracking{1059}
1995/08/14 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/14 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/14 Remanufactured 3500 Engine Core Return Requirements{1000}
1995/08/21 Low Friction Wear Ring Is Available For The Front Suspension Cylinders To Help Reduce Vibration{7201}
1995/08/21 Driveshaft Dust Cups Now Serviceable{3253}
1995/08/21 Improved Level Switch Available{7422}
1995/08/21 Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21 New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.