Rear Suspension Ride Height Has Changed{7213,3278}
Usage:
D30D (3AJ305-Up) Articulated Trucks
Description of Change: The rear suspension ride height has been changed. The change is due to the increased height requirement because of changes to the rear suspension cylinder group, the rear drive axle group and the rear suspension group.
Adaptable To: The increased rear suspension ride height is in effect with D30D (3AJ305) Articulated Truck. The rear suspension ride height dimension is 128.0 ± 10.0 mm (5.04 ± .39 in).
NOTE: This increased ride height dimension should not be used on earlier machines.
Amount of exposed chrome at mid ride for correct rear suspension cylinder ride height. Dimension (A) 128.0 ± 10.0 mm (5.04 ± .39 in).
Caterpillar Information System:
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31 Carriage Rotate Pivot Pin Now Available From Part Service{6408}
1995/07/31 New Hitch Control Retains Engine Speed And Eliminates Hitch Ratcheting{5100}
1995/07/31 New Fuel Sender Provides Increased Reliability{7481}
1995/07/24 New Exhaust Manifold Shield Adds Uniformity To 3500 Machine Engines{1067}
1995/07/24 Correct Amount Of Oil For Vibratory Bearing Reservoir{6645}
1995/07/24 New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/10 Caterpillar Long Life Coolant/Antifreeze Identification{1395}
1995/07/10 Electrical System Updated, New Component List Available{1400,1406,1450}
1995/07/10 Bonded And Riveted Brake Shoes And Lining Kits Are Available For Servicing 120-4931 And 120-4932 Service Brake Groups{4253,5251}
1995/07/10 Longer Bolts And Spacers Used To Retain The Bearing Cage In The Transfer Gear Group{3159}
1995/07/03 Flexible Braided Steel Hose Maintenance {1307,1380,1803}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}
1995/08/07 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Hood Grill Improved With Enlarged Inserts{7251}
1995/08/14 New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}
1995/08/14 Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}