New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
Usage:
CS-531 (3WM, 4KM),
CP-533 (3ZL, 5AL),
CS-533 (3BL, 4HL),
CS-533C (2WN),
CP-563 (1YJ, 5AJ),
CP-563C (5JN),
CS-563 (8XF, 7GG),
CS-563C (4KN),
CS-573 (8PK),
CS-583 (8YJ, 1EL) Vibratory Compactors
Description of Change: A new propel pump manifold gasket is being used. The new gasket is thicker and made of a more durable material than the previous gasket. The thickness of 0.41 mm (.016 in) in the former gasket has been increased to 0.79 mm (.031 in) in the new gasket. The changes will improve the service life of the gasket.
Adaptable To: The new 124-1500 Gasket is a direct replacement for the former 6R-2502 Gasket which is cancelled. The new gasket is adaptable to all machines for the models listed above.
Caterpillar Information System:
1995/07/10 Caterpillar Long Life Coolant/Antifreeze Identification{1395}
1995/07/10 Electrical System Updated, New Component List Available{1400,1406,1450}
1995/07/10 Bonded And Riveted Brake Shoes And Lining Kits Are Available For Servicing 120-4931 And 120-4932 Service Brake Groups{4253,5251}
1995/07/10 Longer Bolts And Spacers Used To Retain The Bearing Cage In The Transfer Gear Group{3159}
1995/07/03 Flexible Braided Steel Hose Maintenance {1307,1380,1803}
1995/07/03 New Electronic Sensor Group (Speed/Timing Sensor) Used {1912}
1995/07/03 New Bolts With "Lock-Patch" Used In Front Timing Gear Groups {1206}
1995/07/03 New Exhaust Manifold Has Higher Temperature Capability {1059}
1995/07/03 Interface Seal Available For 70 Pin Connector Between Electronic Unit Injector (EUI) Wiring Harness And Electronic Control Module (ECM) {1408}
1995/07/03 New Liner Seat Inserts Allow Engine Cylinder Blocks with Deeper Liner Seat Cracks To Be Salvaged {1201,1217}
1995/07/03 New Idler Gear Assembly Used In Rear Gear Groups {1206}
1995/07/03 New Front Gear Group Used To Improve Load Carrying Capability {1206}
1995/07/24 Correct Amount Of Oil For Vibratory Bearing Reservoir{6645}
1995/07/24 New Exhaust Manifold Shield Adds Uniformity To 3500 Machine Engines{1067}
1995/07/31 New Fuel Sender Provides Increased Reliability{7481}
1995/07/31 New Hitch Control Retains Engine Speed And Eliminates Hitch Ratcheting{5100}
1995/07/31 Carriage Rotate Pivot Pin Now Available From Part Service{6408}
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}