1995/07/10 Caterpillar


Caterpillar Long Life Coolant/Antifreeze Identification{1395}

Usage:


All Caterpillar Machines With Engines Converted To Long Life Coolant/Antifreeze

Caterpillar Long Life Coolant/Antifreeze should not be mixed with conventional antifreeze/coolant. The anti-corrosion package in the Long Life Coolant/Antifreeze is different than the anti-corrosion package in Caterpillar Diesel Engine Antifreeze/Coolant and other conventional antifreeze/coolants. Long Life Coolant/Antifreeze contains no silicates, phosphates, borates, or molybdates. Because of this difference, mixing Long Life Coolant/Antifreeze with conventional antifreeze/coolants in NOT recommended. If accidental mixing does occur, the Long Life Coolant/Antifreeze will still perform, but the long life benefits will be reduced.

To prevent accidental mixing of conventional antifreeze with Long Life Coolant/Antifreeze, the Caterpillar Dealer is responsible for identification that will alert customers or mechanics that the engine's cooling system has been converted to Caterpillar Long Life Coolant/Antifreeze. This identification should be placed in a location where it will be easily seen and not overlooked. On or near the radiator top tank, radiator fill neck, or radiator cap would be good locations for this identification.

Caterpillar Information System:

1995/07/10 Electrical System Updated, New Component List Available{1400,1406,1450}
1995/07/10 Bonded And Riveted Brake Shoes And Lining Kits Are Available For Servicing 120-4931 And 120-4932 Service Brake Groups{4253,5251}
1995/07/10 Longer Bolts And Spacers Used To Retain The Bearing Cage In The Transfer Gear Group{3159}
1995/07/03 Flexible Braided Steel Hose Maintenance {1307,1380,1803}
1995/07/03 New Electronic Sensor Group (Speed/Timing Sensor) Used {1912}
1995/07/03 New Bolts With "Lock-Patch" Used In Front Timing Gear Groups {1206}
1995/07/03 New Exhaust Manifold Has Higher Temperature Capability {1059}
1995/07/03 Interface Seal Available For 70 Pin Connector Between Electronic Unit Injector (EUI) Wiring Harness And Electronic Control Module (ECM) {1408}
1995/07/03 New Liner Seat Inserts Allow Engine Cylinder Blocks with Deeper Liner Seat Cracks To Be Salvaged {1201,1217}
1995/07/03 New Idler Gear Assembly Used In Rear Gear Groups {1206}
1995/07/03 New Front Gear Group Used To Improve Load Carrying Capability {1206}
1995/07/03 New Pump Drive Seal Resists Cracking {3108}
1995/07/24 New Propel Pump Manifold Gasket Improves Service Life{5070,4350}
1995/07/24 Correct Amount Of Oil For Vibratory Bearing Reservoir{6645}
1995/07/24 New Exhaust Manifold Shield Adds Uniformity To 3500 Machine Engines{1067}
1995/07/31 New Fuel Sender Provides Increased Reliability{7481}
1995/07/31 New Hitch Control Retains Engine Speed And Eliminates Hitch Ratcheting{5100}
1995/07/31 Carriage Rotate Pivot Pin Now Available From Part Service{6408}
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.