Hood Grill Improved With Enlarged Inserts{7251}
Usage:
416B (8SG, 8ZK),
426B (5YJ, 6KL),
428B (7EJ),
436B (6MJ, 7FL),
438B (3KK),
446B (5BL),
416 (5PC),
426 (7BC),
428 (6TC),
436 (5KF),
438 (3DJ),
446 (6XF) Backhoe Loaders
Description of Change: An improved hood grill with larger bolt retention inserts is now used.
Adaptable To: The improved 9R-0362 Hood Grill (with same part number) went into production on an approximate date of January 1994. The effectivity of this change is not known.
Caterpillar Information System:
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31 Carriage Rotate Pivot Pin Now Available From Part Service{6408}
1995/08/14 New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}
1995/08/14 Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}
1995/08/14 New Indicator For Hydraulic Charge Filter Prevents Leakage{5068}
1995/08/14 New Exhaust Manifold Group Helps Prevent Exhaust Manifold Cracking{1059}
1995/08/14 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/14 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/14 Remanufactured 3500 Engine Core Return Requirements{1000}
1995/08/21 Low Friction Wear Ring Is Available For The Front Suspension Cylinders To Help Reduce Vibration{7201}
1995/08/21 Driveshaft Dust Cups Now Serviceable{3253}
1995/08/21 Improved Level Switch Available{7422}
1995/08/21 Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}