Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
Usage:
Caterpillar Machines Powered By 3114 And 3116 Machine Engines
An improved 1U-7430 Seal Installer is available to install the front crankshaft seal in the engines in these machines. The overall length of the improved installer has been increased by 5.0 mm (.20 in) to 35.0 mm (1.38 in). Because the improved installer is longer, it does not require the additional 5U-1118 Washers used with damper pulley mounting bolts to install the front crankshaft seal. When using the improved seal installer, tighten the damper pulley mounting bolts until the seal installer bottoms out.
Caterpillar Information System:
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/07/31 New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31 Carriage Rotate Pivot Pin Now Available From Part Service{6408}
1995/07/31 New Hitch Control Retains Engine Speed And Eliminates Hitch Ratcheting{5100}
1995/07/31 New Fuel Sender Provides Increased Reliability{7481}
1995/07/24 New Exhaust Manifold Shield Adds Uniformity To 3500 Machine Engines{1067}
1995/07/24 Correct Amount Of Oil For Vibratory Bearing Reservoir{6645}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Hood Grill Improved With Enlarged Inserts{7251}
1995/08/14 New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}
1995/08/14 Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}
1995/08/14 New Indicator For Hydraulic Charge Filter Prevents Leakage{5068}
1995/08/14 New Exhaust Manifold Group Helps Prevent Exhaust Manifold Cracking{1059}
1995/08/14 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/14 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/14 Remanufactured 3500 Engine Core Return Requirements{1000}