Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}
Usage:
D400D (8TF, 4EJ) Articulated Trucks
Some D400D Articulated Trucks are equipped with wide gears in the final drive and a spacer between the wheel assembly and planetary carrier. The wide gears and spacer are located on the front axle of the machine. The part numbers needed for servicing the front axle on these machines are given in the chart that follows.
NOTE: Any group with the spacer between the wheel and planet carrier must have the ring gear specified in the chart to prevent interference between the ring gear and spacer.
Location of Parts
Caterpillar Information System:
1995/08/14 New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}
1995/08/14 Hood Grill Improved With Enlarged Inserts{7251}
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/07 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07 Selecting The Correct Turbocharger, Wastegate Orifice, And Personality Module For 3500 Engines Used In 793B Trucks{1052,1057,1902}
1995/08/07 Selecting The Correct Turbocharger And Wastegate Orifice For 3500 Engines Used In 793 Trucks{1052,1057}
1995/08/07 Improved Payload Measurement System Pressure Sensors{7494,1901}
1995/08/07 Description Of Service Code Information{7450,7569}
1995/08/07 Brake Release Pump For Towing Is Available{4354}
1995/08/07 Rear Suspension Ride Height Has Changed{7213,3278}
1995/08/14 New Indicator For Hydraulic Charge Filter Prevents Leakage{5068}
1995/08/14 New Exhaust Manifold Group Helps Prevent Exhaust Manifold Cracking{1059}
1995/08/14 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/14 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/14 Remanufactured 3500 Engine Core Return Requirements{1000}
1995/08/21 Low Friction Wear Ring Is Available For The Front Suspension Cylinders To Help Reduce Vibration{7201}
1995/08/21 Driveshaft Dust Cups Now Serviceable{3253}
1995/08/21 Improved Level Switch Available{7422}
1995/08/21 Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21 New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/28 New Cylinder Head Group Includes Stronger Cylinder Head{1100,1101}