1995/08/21 Caterpillar


Low Friction Wear Ring Is Available For The Front Suspension Cylinders To Help Reduce Vibration{7201}

Usage:


772B (64W155-Up) Tractors;
773B (63W770-Up) Trucks

A new 107-4347 Wear Ring is available for front suspension groups. The new 107-4347 Wear Ring, when used with a 9X-7450 U-cup Seal, will reduce friction in the front suspension group. The reduced friction will help eliminate vibration caused by tire bounce.

The new 107-4347 Wear Ring is a direct replacement for the 1U-4778 Wear Ring or 8T-7692 Ring in the 1U-4777, 116-3092, 107-2200 and 4Z-6168 Front Suspension Groups used in the 772B (64W155-Up) Tractors and 773B (63W770-Up) Trucks. One 9X-7450 U-cup Seal replaces the 8T-3539 and 8T-3540 Seals in the same front suspension groups.


Location of the original 1U-4778 Wear Ring or 8T-7692 Ring (1) and 8T-3540 (2) and 8T-3539 (3) Seals.

Caterpillar Information System:

1995/08/14 Remanufactured 3500 Engine Core Return Requirements{1000}
1995/08/14 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/14 New Piston Crown Assembly Used In Piston And Rod Group{1214}
1995/08/14 Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14 New Exhaust Manifold Group Helps Prevent Exhaust Manifold Cracking{1059}
1995/08/14 New Indicator For Hydraulic Charge Filter Prevents Leakage{5068}
1995/08/14 Parts Service Information For Articulated Trucks Equipped With Wide Gears In The Final Drive And A Spacer Between The Wheel Assembly And Planetary Carrier{4055,4051}
1995/08/14 New Components In Water Lines Groups And Aftercooler Group Allow Field Installation Of Variable Speed Fan Clutch Vital Information Management System (VIMS){1380,1063,1359}
1995/08/14 Hood Grill Improved With Enlarged Inserts{7251}
1995/08/14 New Axle Sustains Higher Dynamic Loads{3282}
1995/08/14 Reattaching Grommets To 3E-9167 And 3E-9170 Machine Performance Panels{7490}
1995/08/07 Injector Solenoids on Engines Equipped with EUI Are Not Polarity Sensitive{1259}
1995/08/21 Driveshaft Dust Cups Now Serviceable{3253}
1995/08/21 Improved Level Switch Available{7422}
1995/08/21 Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21 New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/28 New Cylinder Head Group Includes Stronger Cylinder Head{1100,1101}
1995/08/28 New Steering Accumulator Charging Valve Group Is Being Used To Improve Service Life{4307}
1995/08/28 Special Instruction SEHS9879 Available For Installing An Air Cooling Coil For The Air Dryer On Articulated Trucks {4285}
1995/08/28 Adding Vibratory Lock Out Function In Vibratory System{1435,3220,5653}
1995/08/28 Modifying Former Exhaust Manifold Sections To Help Prevent Loosening Or Breakage Of The Exhaust Manifold Retaining Bolts{1059}
1995/08/28 New Thicker Exhaust Manifold Gasket Used{1059}
1995/08/28 New And Reconditioned Valve Projection Specifications{1105}
1995/09/04 New High Pressured Turbocharger Groups Reduce Exhaust Leaks{1052,1053}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.