3064 and 3066 Engines for Caterpillar Built Machines Caterpillar


Engine Speed - Check

Usage:

320B L 1ES

表 1
所需工具    
零件号     零件名称     数量    
9U-7400     多用转速表工具总成     1    
OR    
9U-7401     多用转速表工具总成 (1)     1    
6V-4950     速度传感器     1    
( 1 ) 属于 9U-7400 多用转速表工具总成



图 1g00286276

9U-7400 多用转速表工具总成

9U-7400 多用转速表工具总成 可通过飞轮壳上的电磁传感器测量发动机转速。 9U-7400 多用转速表工具总成 还能根据看得到的发动机旋转部件测量发动机转速。

注: 有关 9U-7400 多用转速表工具总成 的运行说明和测试步骤的说明,请参阅专门说明书, NEHS0605。

6V-4950 速度传感器 是可与 9U-7401 多用转速表工具总成 配合使用的另一种诊断工具附件。 6V-4950 速度传感器 可在厚度为 6 mm (0.25 in) 的单层喷油管路上使用。 通过这些工具,可以快速测量发动机转速,精度为 ± 1 rpm。

注: 有关 6V-4950 速度传感器 的操作说明,请参阅专门说明书, SEHS8029。

有关最大发动机工作转速(rpm),请参阅操作和保养手册, "废气排放认证贴膜"。

Caterpillar Information System:

3126B Marine Engines ECM Will Not Communicate with Other Systems or Display Modules
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Angle)
2001/08/01 A New Piston and Piston Rings Are Now Available {1214, 1215}
HDB Series and M1 Series Heavy Duty Brushless Alternators Residual Magnetism - Restore
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Assemble
2001/08/01 Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
2001/08/01 Oil Pan No Longer Requires Gasket Sealant {1302}
HDB Series and M1 Series Heavy Duty Brushless Alternators Rectifier - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Disassemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Stator - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
2001/08/01 When These Control Groups Are Used As Service Replacements, Use This Procedure For The Initial Setup Of The 203-7810 Engine Monitoring Control Group And The 203-7811 Engine Monitoring Control Group {1901, 7490}
2001/10/01 The Oil Pan No Longer Requires Gasket Sealant {1302}
3512 Industrial Engine Engine Oil Pan
G3600 Engines Engine Oil Temperature Regulator
G3600 Engines Ignition System
3408E and 3412E Industrial Engines Throttle Position Sensor - Calibrate
3126B Marine Engines Diagnostic Codes
3512B Marine Auxiliary Engine Vibration Sensor
SBF214 and SUF557 Skid Mounted Power Packs Maintenance Interval Schedule
2001/11/01 A New Temperature Indicator Assembly Is Available To Measure The Temperature Of The Air In The Air Inlet Manifold {1058, 7450}
SPS342 Skid Mounted Pumper Maintenance Interval Schedule
2001/08/01 A Special Instruction Is Available For Replacing Starting Motor Solenoids {1467}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.