Engine Oil Filter Base - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) in order to remove engine oil filters (4).
- Remove tube assembly (5).
- Remove bolts (1) and (3).
- Remove engine oil filter base (2).
Show/hide table
Illustration 1 | g01082915 |
Caterpillar Information System:
HDB Series and M1 Series Heavy Duty Brushless Alternators Capacitor - Test
G3600 Engines Aftercooler
HDB Series and M1 Series Heavy Duty Brushless Alternators Field Winding - Test
2001/08/01 Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
3126B Marine Engines Sensors and Electrical Connectors
G3408C and G3412C Engines Balancer Group - Rear
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - M1 Series Alternator (35 Amp)
3512B Marine Auxiliary Engine Speed Control
3412E, C30 and C32 Marine Engines Exhaust Manifold - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Replace
3054 and 3056 Industrial and Generator Set Engines Maintenance Interval Schedule
3512B Marine Auxiliary Engine System Configuration Parameters
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
HDB Series and M1 Series Heavy Duty Brushless Alternators Stator - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Disassemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Rectifier - Test
2001/08/01 Oil Pan No Longer Requires Gasket Sealant {1302}
2001/08/01 Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Assemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Residual Magnetism - Restore
2001/08/01 A New Piston and Piston Rings Are Now Available {1214, 1215}
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Angle)
3126B Marine Engines ECM Will Not Communicate with Other Systems or Display Modules
3064 and 3066 Engines for Caterpillar Built Machines Engine Speed - Check