Balancer Group - Rear
Show/hide table
Illustration 1 | g01403755 |
Note: The bearing joint must be on the centerline of the balance weight within ± 20 degrees.
(2) Shaft
- Diameter ... 50.800 ± 0.013 mm (2.0000 ± 0.0005 inch)
- Bearing bore after assembly ... 50.900 ± 0.048 mm (2.0039 ± 0.0019 inch)
The mark on the balancer gear (3) must be in alignment with the mark on the camshaft gear (1) on engines with standard rotation.
Caterpillar Information System:
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - M1 Series Alternator (35 Amp)
3512B Marine Auxiliary Engine Speed Control
3412E, C30 and C32 Marine Engines Exhaust Manifold - Remove and Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Seat Belt - Replace
3054 and 3056 Industrial and Generator Set Engines Maintenance Interval Schedule
3512B Marine Auxiliary Engine System Configuration Parameters
3512B Marine Auxiliary Engine Engine Monitoring System
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Disassemble - M1 Series Alternator (35 Amp)
G3500 Engines Manifold Air Pressure Sensor
C15 Petroleum Generator Set Engines Electronic Unit Injector - Adjust
G3408C and G3412C Engines Connecting Rod Bearings - Remove and Install
G3406 Engine Starting System
3126B Marine Engines Sensors and Electrical Connectors
2001/08/01 Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
HDB Series and M1 Series Heavy Duty Brushless Alternators Field Winding - Test
G3600 Engines Aftercooler
HDB Series and M1 Series Heavy Duty Brushless Alternators Capacitor - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
HDB Series and M1 Series Heavy Duty Brushless Alternators Stator - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Disassemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Rectifier - Test
2001/08/01 Oil Pan No Longer Requires Gasket Sealant {1302}
2001/08/01 Additional Troubleshooting Procedures For Speed Burps {1901, 1913}