Oil Pan No Longer Requires Gasket Sealant {1302}
- Engine:
- 3126E (S/N: CKM1-UP; CRP1-UP; 8SZ1-UP; 9SZ1-UP)
- 3116 (S/N: 2FR1-UP)
- 3126 (S/N: 1WM1-UP; 4ES1-UP; 8HW1-UP; 7LZ1-UP)
- 3126B (S/N: BKD1-UP; 1AJ1-UP; 8YL1-UP; 7AS1-UP)
The assembly procedure for the oil pan has been improved. Gasket sealant is no longer required. The installation procedure has changed. The service manuals have been updated.
Reference: Disassembly and Assembly, RENR1369, "3126B and 3126E Truck Engines"Disassembly and Assembly, SENR5120, "3116 Truck Engine"Disassembly and Assembly, SENR6553, "3100 HEUI Diesel Truck Engine"
Caterpillar Information System:
HDB Series and M1 Series Heavy Duty Brushless Alternators Rectifier - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Disassemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Stator - Test
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Install
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Remove
HDB Series and M1 Series Heavy Duty Brushless Alternators Capacitor - Test
G3600 Engines Aftercooler
HDB Series and M1 Series Heavy Duty Brushless Alternators Field Winding - Test
2001/08/01 Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
3126B Marine Engines Sensors and Electrical Connectors
G3408C and G3412C Engines Balancer Group - Rear
HDB Series and M1 Series Heavy Duty Brushless Alternators Alternator - Assemble - M1 Series Alternator (35 Amp)
2001/08/01 Additional Troubleshooting Procedures For Speed Burps {1901, 1913}
3412E, C30 and C32 Marine Engines Engine Oil Filter Base - Assemble
HDB Series and M1 Series Heavy Duty Brushless Alternators Residual Magnetism - Restore
2001/08/01 A New Piston and Piston Rings Are Now Available {1214, 1215}
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Snow Plow/Dozer Angle)
3126B Marine Engines ECM Will Not Communicate with Other Systems or Display Modules
3064 and 3066 Engines for Caterpillar Built Machines Engine Speed - Check
2001/08/01 When These Control Groups Are Used As Service Replacements, Use This Procedure For The Initial Setup Of The 203-7810 Engine Monitoring Control Group And The 203-7811 Engine Monitoring Control Group {1901, 7490}
2001/10/01 The Oil Pan No Longer Requires Gasket Sealant {1302}
3512 Industrial Engine Engine Oil Pan
G3600 Engines Engine Oil Temperature Regulator
G3600 Engines Ignition System