CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Caterpillar


Gear Pump (Steering) - Disassemble - CP-433E and CS-433E

Usage:

CP-433E ASN

拆解步骤

开始:

  1. 拆下齿轮泵(转向)。 请参阅拆解和组装, "齿轮泵(转向)- 拆卸"。

注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。 污染物或污垢可能会损坏精密部件。 拆解步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。




    图 1g00842178

  1. 将螺栓 (1) 和阀壳体 (3) 从端盖 (2) 上拆下。



    图 2g00842179

  1. 将 O 形密封圈 (4) 从阀壳体 (3) 上拆下。



    图 3g00842180

  1. 将螺栓 (5) 和端盖 (6) 从泵壳体 (7) 上拆下。



    图 4g00842181

  1. 将止推片 (8) 从端盖 (6) 上拆下。



    图 5g00842182

  1. 将密封件 (9) 从端盖 (6) 上拆下。



    图 6g00842183

  1. 将密封件 (10) 从端盖 (6) 上拆下。



    图 7g00842184

  1. 将唇形密封 (11) 从端盖 (6) 上拆下。



    图 8g00842185

  1. 将主动齿轮 (12) 和从动齿轮 (13) 从泵壳体 (7) 上拆下。

  1. 将泵壳体 (7) 从端盖 (2) 上拆下。



    图 9g00842186

  1. 将止推片 (15) 和密封件 (14) 从端盖 (2) 上拆下。

Caterpillar Information System:

950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Turbocharger - Remove - Engine in Chassis
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Travel Motor - Disassemble
2002/10/07 Cable Assembly for Stabilizer Pads Prevents Unwanted Flipping {7222}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Muffler - Remove and Install
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders 5 Volt Engine Pressure Sensor Supply Circuit - Test
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Pump (Axle Propel and Drum Propel) - Install
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 167-1351 Generator through 167-1354 Generator
740 EJECTOR Articulated Truck Ejector, Steering, Suspension, and Fan Drive Systems Steering System
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
773E Off-Highway Truck/Tractor and 775E Quarry Truck Plate Locations and Film Locations
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Air Cleaner - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Air Inlet Heater - Install
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Engine Speed/Timing Sensor - Calibrate
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Turbocharger - Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)
3024C and C1.1 Engines for Caterpillar Built Machines Cylinder Head - Inspect
2002/09/09 The Thrust Bearing in the Final Drive has Changed {4050}
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Refrigerant Compressor - Remove and Install - Engine in Chassis
2001/11/19 A New Crankshaft Front Seal Is Now In Production {1160}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Travel Motor - Assemble
TL4 Series Soil Finisher Walk-Around Inspection
2001/12/17 Addition to Operation and Maintenance , "Final Drive Preload - Check" {1000, 7000, 7500, 7519}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic System Pressure - Release
950G Series II and 962G Series II Wheel Loaders and IT62G Series II Integrated Toolcarrier Power Train Torque Converter, Transmission and Output Transfer Gears - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.