Winding Data for 167-1351 Generator through 167-1354 Generator
167-1351 Generator
Show/hide table
| MAIN STATOR AND ROTOR WINDING DATA | |||||||
|---|---|---|---|---|---|---|---|
| ITEM | STATOR | ROTOR | |||||
| Stack Height | 527.1 mm (20.75 inch) |
527.1 mm (20.75 inch) |
|||||
| Slots | 60 | - | |||||
| Coil Throw | 1 - 11 | - | |||||
| Turns/Coil | 2 | - | |||||
| Turns/Pole | - | 138 | |||||
| No. & Wire Size | 15 - #14 | #8 SQ | |||||
| Mean Length Turn | 1618.0 mm (63.7 inch) |
- | |||||
| Copper Weight | 54.7 kg (120.5 lb) |
73.0 kg (161 lb) |
|||||
| Inside Connection (1) | 2 Parallel Wye / 4 Parallel Wye | Series | |||||
| Line Leads (No. & Size) | - | - | |||||
| Terminal bolt size | 3/8 inch | - | |||||
| Low Voltage connected line resistance at 25 ° C (77 ° F) | 0.00455 ohms | - | |||||
| Field lead resistance at 25 ° C (77 ° F) | - | 1.430 ohms | |||||
| EXCITER WINDING DATA | |||||||
| Exciter Frequency (Hz) | 120 Hz | Permanent Magnet Frequency | - Hz | ||||
| Exciter Poles | 8 | ||||||
| ITEM | STATOR (FIELD) | ROTOR (ARMATURE) | Permanent Magnet Stator | ||||
| Stack Length | 50.8 mm (2.0 inch) |
50.8 mm (2.0 inch) |
- | ||||
| Coils/Group | - | 2 | - | ||||
| Slots (Coils) | 8 | 48 | - | ||||
| Turns (Coils) | 178 | 12 | - | ||||
| No. & Size Wire | 1 - #14.5 | 2 - #17.5 | - | ||||
| Coil Throw | 1 - 2 | 1 - 6 | - | ||||
| Mean Length Turn (Calc.) | 304.8 mm (12.0 inch) |
1066.8 mm (42.0 inch) |
- | ||||
| Copper Weight | 10.3 kg (22.6 lb) |
3.6 kg (7.9 lb) |
- | ||||
| Insulation | Heavy Polyester Polyamide Imide | ||||||
| Connection (2) | Series | 2 Parallel Wye | - | ||||
| Line Leads | 2 - #14 | 3 - #10 | - | ||||
Show/hide table
| ( 1 ) | See Specifications, "Connection Diagrams for Main Stator and Main Rotor" Connection Diagram 64 |
| ( 2 ) | See Specifications, "Connection Diagrams for Exciter" Connection Diagram I |
167-1352 Generator
Show/hide table
| MAIN STATOR AND ROTOR WINDING DATA | |||||||
|---|---|---|---|---|---|---|---|
| ITEM | STATOR | ROTOR | |||||
| Stack Height | 527.1 mm (20.75 inch) |
527.1 mm (20.75 inch) |
|||||
| Slots | 84 | - | |||||
| Coil Throw | 1 - 15 | - | |||||
| Turns/Coil | 1 | - | |||||
| Turns/Pole | - | 138 | |||||
| No. & Wire Size | 18 - #14 | #8 SQ | |||||
| Mean Length Turn | 1701.8 mm (67.0 inch) |
- | |||||
| Copper Weight | 48.5 kg (107 lb) |
73.0 kg (161 lb) |
|||||
| Inside Connection (1) | 2 Parallel Wye / 4 Parallel Wye | Series | |||||
| Line Leads (No. & Size) | - | - | |||||
| Terminal bolt size | 3/8 inch | - | |||||
| Low Voltage connected line resistance at 25 ° C (77 ° F) | 0.00119 ohms | - | |||||
| Field lead resistance at 25 ° C (77 ° F) | - | 1.430 ohms | |||||
| EXCITER WINDING DATA | |||||||
| Exciter Frequency (Hz) | 120 Hz | Permanent Magnet Frequency | - Hz | ||||
| Exciter Poles | 8 | ||||||
| ITEM | STATOR (FIELD) | ROTOR (ARMATURE) | Permanent Magnet Stator | ||||
| Stack Length | 50.8 mm (2.0 inch) |
50.8 mm (2.0 inch) |
- | ||||
| Coils/Group | - | 2 | - | ||||
| Slots (Coils) | 8 | 48 | - | ||||
| Turns (Coils) | 178 | 12 | - | ||||
| No. & Size Wire | 1 - #14.5 | 2 - #17.5 | - | ||||
| Coil Throw | 1 - 2 | 1 - 6 | - | ||||
| Mean Length Turn (Calc.) | 304.8 mm (12.0 inch) |
1066.8 mm (42.0 inch) |
- | ||||
| Copper Weight | 10.3 kg (22.6 lb) |
3.6 kg (7.9 lb) |
- | ||||
| Insulation | Heavy Polyester Polyamide Imide | ||||||
| Connection (2) | Series | 2 Parallel Wye | - | ||||
| Line Leads | 2 - #14 | 3 - #10 | - | ||||
Show/hide table
| ( 1 ) | See Specifications, "Connection Diagrams for Main Stator and Main Rotor" Connection Diagram 64 |
| ( 2 ) | See Specifications, "Connection Diagrams for Exciter" Connection Diagram I |
167-1353 Generator
Show/hide table
| MAIN STATOR AND ROTOR WINDING DATA | |||||||
|---|---|---|---|---|---|---|---|
| ITEM | STATOR | ROTOR | |||||
| Stack Height | 527.1 mm (20.75 inch) |
527.1 mm (20.75 inch) |
|||||
| Slots | 60 | - | |||||
| Coil Throw | 1 - 11 | - | |||||
| Turns/Coil | 2 | - | |||||
| Turns/Pole | - | 138 | |||||
| No. & Wire Size | 15 - #14 | #8 SQ | |||||
| Mean Length Turn | 1618.0 mm (63.7 inch) |
- | |||||
| Copper Weight | 54.7 kg (120.5 lb) |
73.0 kg (161 lb) |
|||||
| Inside Connection (1) | 2 Parallel Wye / 4 Parallel Wye | Series | |||||
| Line Leads (No. & Size) | - | - | |||||
| Terminal bolt size | 3/8 inch | - | |||||
| Low Voltage connected line resistance at 25 ° C (77 ° F) | 0.00455 ohms | - | |||||
| Field lead resistance at 25 ° C (77 ° F) | - | 1.430 ohms | |||||
| EXCITER WINDING DATA | |||||||
| Exciter Frequency (Hz) | 120 Hz | Permanent Magnet Frequency | - Hz | ||||
| Exciter Poles | 8 | ||||||
| ITEM | STATOR (FIELD) | ROTOR (ARMATURE) | Permanent Magnet Stator | ||||
| Stack Length | 50.8 mm (2.0 inch) |
50.8 mm (2.0 inch) |
- | ||||
| Coils/Group | - | 2 | - | ||||
| Slots (Coils) | 8 | 48 | - | ||||
| Turns (Coils) | 178 | 12 | - | ||||
| No. & Size Wire | 1 - #14.5 | 2 - #17.5 | - | ||||
| Coil Throw | 1 - 2 | 1 - 6 | - | ||||
| Mean Length Turn (Calc.) | 304.8 mm (12.0 inch) |
1066.8 mm (42.0 inch) |
- | ||||
| Copper Weight | 10.3 kg (22.6 lb) |
3.6 kg (7.9 lb) |
- | ||||
| Insulation | Heavy Polyester Polyamide Imide | ||||||
| Connection (2) | Series | 2 Parallel Wye | - | ||||
| Line Leads | 2 - #14 | 3 - #10 | - | ||||
Show/hide table
| ( 1 ) | See Specifications, "Connection Diagrams for Main Stator and Main Rotor" Connection Diagram 64 |
| ( 2 ) | See Specifications, "Connection Diagrams for Exciter" Connection Diagram I |
167-1354 Generator
Show/hide table
| MAIN STATOR AND ROTOR WINDING DATA | |||||||
|---|---|---|---|---|---|---|---|
| ITEM | STATOR | ROTOR | |||||
| Stack Height | 527.1 mm (20.75 inch) |
527.1 mm (20.75 inch) |
|||||
| Slots | 84 | - | |||||
| Coil Throw | 1 - 15 | - | |||||
| Turns/Coil | 1 | - | |||||
| Turns/Pole | - | 138 | |||||
| No. & Wire Size | 18 - #14 | #8 SQ | |||||
| Mean Length Turn | 1701.8 mm (67.0 inch) |
- | |||||
| Copper Weight | 48.5 kg (107 lb) |
73.0 kg (161 lb) |
|||||
| Inside Connection (1) | 2 Parallel Wye / 4 Parallel Wye | Series | |||||
| Line Leads (No. & Size) | - | - | |||||
| Terminal bolt size | 3/8 inch | - | |||||
| Low Voltage connected line resistance at 25 ° C (77 ° F) | 0.00119 ohms | - | |||||
| Field lead resistance at 25 ° C (77 ° F) | - | 1.430 ohms | |||||
| EXCITER WINDING DATA | |||||||
| Exciter Frequency (Hz) | 120 Hz | Permanent Magnet Frequency | - Hz | ||||
| Exciter Poles | 8 | ||||||
| ITEM | STATOR (FIELD) | ROTOR (ARMATURE) | Permanent Magnet Stator | ||||
| Stack Length | 50.8 mm (2.0 inch) |
50.8 mm (2.0 inch) |
- | ||||
| Coils/Group | - | 2 | - | ||||
| Slots (Coils) | 8 | 48 | - | ||||
| Turns (Coils) | 178 | 12 | - | ||||
| No. & Size Wire | 1 - #14.5 | 2 - #17.5 | - | ||||
| Coil Throw | 1 - 2 | 1 - 6 | - | ||||
| Mean Length Turn (Calc.) | 304.8 mm (12.0 inch) |
1066.8 mm (42.0 inch) |
- | ||||
| Copper Weight | 10.3 kg (22.6 lb) |
3.6 kg (7.9 lb) |
- | ||||
| Insulation | Heavy Polyester Polyamide Imide | ||||||
| Connection (2) | Series | 2 Parallel Wye | - | ||||
| Line Leads | 2 - #14 | 3 - #10 | - | ||||
Show/hide table
| ( 1 ) | See Specifications, "Connection Diagrams for Main Stator and Main Rotor" Connection Diagram 64 |
| ( 2 ) | See Specifications, "Connection Diagrams for Exciter" Connection Diagram I |
Caterpillar Information System:
740 EJECTOR Articulated Truck Ejector, Steering, Suspension, and Fan Drive Systems Steering System
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
773E Off-Highway Truck/Tractor and 775E Quarry Truck Plate Locations and Film Locations
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Air Cleaner - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Air Inlet Heater - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Piston Pump Neutral - Test and Adjust
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Relief Valve (Charge) - Test and Adjust
2002/02/18 Improved Hydraulic Cylinders with New Seals and Fittings are Used for Harvester Heads {5104, 5554, 5558, 5559, 5572, 5573}
773E Off-Highway Truck/Tractor and 775E Quarry Truck Air Dryer - Check
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Relief Valve (Main) - Test and Adjust
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Pump (Axle Propel and Drum Propel) - Install
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders 5 Volt Engine Pressure Sensor Supply Circuit - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Muffler - Remove and Install
2002/10/07 Cable Assembly for Stabilizer Pads Prevents Unwanted Flipping {7222}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Travel Motor - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Turbocharger - Remove - Engine in Chassis
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Gear Pump (Steering) - Disassemble - CP-433E and CS-433E
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Engine Speed/Timing Sensor - Calibrate
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Turbocharger - Install - Engine in Chassis
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)
3024C and C1.1 Engines for Caterpillar Built Machines Cylinder Head - Inspect
2002/09/09 The Thrust Bearing in the Final Drive has Changed {4050}