Air Cleaner - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Open the engine hood.
- Remove precleaner assembly (1) .
Show/hide table
 | |
| Illustration 1 | g00841579 |
- Loosen two retaining clips (2). Remove air cleaner cover assembly (3) .
Show/hide table
 | |
| Illustration 2 | g00841597 |
- Remove primary element (4) .
Show/hide table
 | |
| Illustration 3 | g00841600 |
- Remove secondary element (5) .
Show/hide table
 | |
| Illustration 4 | g00841601 |
- Loosen two clamps (6). Disconnect the tube assembly.
Show/hide table
 | |
| Illustration 5 | g00841604 |
- Remove four bolts (7) and the air cleaner housing.
Show/hide table
 | |
| Illustration 6 | g00841612 |
Installation Procedure
- Install the air cleaner housing and four bolts (7) .
Show/hide table
| | |
| Illustration 7 | g00841612 |
- Connect the tube assembly and tighten two hose clamps (6) .
Show/hide table
| | |
| Illustration 8 | g00841604 |
- Install secondary element (5) .
Show/hide table
| | |
| Illustration 9 | g00841601 |
- Install primary element (4) .
Show/hide table
| | |
| Illustration 10 | g00841600 |
- Install air cleaner cover assembly (3). Tighten two retaining clips (2) .
Show/hide table
| | |
| Illustration 11 | g00841597 |
- Install precleaner assembly (1) .
Show/hide table
| | |
| Illustration 12 | g00841579 |
- Close the engine hood.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Air Inlet Heater - Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
CP-433E, CS-423E and CS433E Vibratory Soil Compactors Vibratory System Piston Motor (Vibratory System)
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Piston Pump Neutral - Test and Adjust
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Relief Valve (Charge) - Test and Adjust
2002/02/18 Improved Hydraulic Cylinders with New Seals and Fittings are Used for Harvester Heads {5104, 5554, 5558, 5559, 5572, 5573}
773E Off-Highway Truck/Tractor and 775E Quarry Truck Air Dryer - Check
CP-433E, CS-433E and CS433E Vibratory Soil Compactors Propel System Relief Valve (Main) - Test and Adjust
140H and 160H Motor Graders Specifications
950G Series II and 962G Series II Wheel Loaders and IT62G Series II Integrated Toolcarrier Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
TL4 Series Soil Finisher Implement - Lubricate
3408E and 3412E Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
773E Off-Highway Truck/Tractor and 775E Quarry Truck Plate Locations and Film Locations
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner Projection - Inspect
740 EJECTOR Articulated Truck Ejector, Steering, Suspension, and Fan Drive Systems Steering System
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for 167-1351 Generator through 167-1354 Generator
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Piston Pump (Axle Propel and Drum Propel) - Install
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders 5 Volt Engine Pressure Sensor Supply Circuit - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Muffler - Remove and Install
2002/10/07 Cable Assembly for Stabilizer Pads Prevents Unwanted Flipping {7222}
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Travel Motor - Disassemble
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Engine Supplement Turbocharger - Remove - Engine in Chassis
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Gear Pump (Steering) - Disassemble - CP-433E and CS-433E
3176C and 3406E Engines for D7R Series II and D8R Series II Track-Type Tractors Engine Speed/Timing Sensor - Calibrate