Transmission Oil Pump - Disassemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 437-3776 | Fixture As. | 1 |
1U-9128(1) | Adapter Plate | 1 | |
1U-5750 | Engine Stand | 1 | |
B | 1U-7600 | Slide Hammer Puller Gp | 1 |
8B-7554 | Bearing Cup Puller Gp | 1 |
Show/hide table
(1) | Part of the Hydraulic Test Bench Tooling. |
- Remove retaining ring (2) and spline adapter (1).
Show/hide table
Illustration 2 g06097859 - Remove nuts (4) and plate (3).
Show/hide table
Illustration 3 g06097912 - Remove o-ring seal (5).
Show/hide table
Illustration 4 g06098032 - Mount the transmission oil pump to Tooling (A).
- Remove bolts (6) and cover (7).
Show/hide table
Illustration 5 g06098413 - Remove o-ring seal (8), retaining ring (9), and shaft assembly (10).
Show/hide table
Illustration 6 g06098439 - Remove nuts (11), bolts (12), and housing (13).
Show/hide table
Illustration 7 g06098467 - Remove o-ring seal (14) and plate (15).
Show/hide table
Illustration 8 g06098521 - Remove seal group (16) from plate (15).
Show/hide table
Illustration 9 g06098543 - Remove housing (17) and studs (18).
Show/hide table
Illustration 10 g06098564 - Remove o-ring seal (19).
Show/hide table
Illustration 11 g06098802 - Remove gear (20) and gear (21).
Show/hide table
Illustration 12 g06098829 - Remove plate (22).
Show/hide table
Illustration 13 g06098841 - Remove seal group (23) from plate (22).
Show/hide table
Illustration 14 g06098931 - Use Tooling (B) to remove seal carrier (24).
Show/hide table
Illustration 15 g06098944 - Remove lip seal (25) and o-ring seal (26).
Show/hide table
Illustration 16 g06098990 - Remove lip seal (27).
Show/hide table
Illustration 1 | g06099436 |
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Install
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225} Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225}
C175-16 and C175-20 Locomotive Engines Water Pump - Assemble
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270} New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
C175-16 and C175-20 Locomotive Engines Water Pump - Disassemble
C175-16 Locomotive Engine Engine Operation
C175-16 Marine Propulsion Engines Fuel System Verification - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Is High
C175-16 and C175-20 Locomotive Engines Flywheel Housing - Install
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Remove
TR35 Locomotive Transmission Transmission Oil Pump - Assemble
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Remove
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Is Noisy
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Install
SPF343 and SPF343C Trailer Mounted Pumpers Model View Illustrations
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920} New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920}