Model View Illustrations
The following illustrations show various typical features of the SPF343 Trailer Mounted Pumper. The illustrations do not show all the options that are available.
Show/hide table
| |
| Illustration 1 | g06096790 |
|
(1) Quintuplex pump
(2) Transmission (3) Radiator (4) Fan Hydraulic tank (5) Coolant heater (6) Fuel tank (7) Dual transmission filters (8) Fuel tank (9) Power end lube tank (10) Power end lube sight gauge (11) Catch tank sight gauge (12) Catch tank | |
Show/hide table
| |
| Illustration 2 | g06096823 |
|
(1) Dual mufflers
(2) Quad pre-cleaners (3) Quad air cleaner (4) Transmission Electronic Control Module (ECM) (5) Power end lube filter (6) Customer control panel (7) Instrument panel (8) Air-Over-Oil tank (9) Battery (10) Fire extinguisher | |
Show/hide table
| |
| Illustration 3 | g06097050 |
|
3512C Engine (1) Air cleaner (2) Air shutoff (3) Cooling system temperature regulator (4) Alternator (5) Engine oil pump (6) Engine oil coolers (7) Fuel filters (8) Fuel priming pump (9) Engine oil filters (10) Crankcase breather (11) Engine oil filler (12) Engine oil drain (13) Engine oil level gauge (14) Air compressor (15) Electronic Control Module (ECM) | |
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Is Noisy
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Remove
TR35 Locomotive Transmission Transmission Oil Pump - Assemble
TR35 Locomotive Transmission Transmission Oil Pump - Disassemble
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Install
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225} Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225}
C175-16 and C175-20 Locomotive Engines Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920} New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920}
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
C280 Marine Engines Solenoid Valve (DEF Return)
C175-16 Locomotive Engine Thermostatic Valve - Inspect
PM820, PM822, and PM825 Cold Planer Machine Systems Upper Sheave (Rotor Drive) - Remove and Install
C175-20 Locomotive Engine Aftercooler Core - Inspect/Clean
3500 Engines Gear Group (Rear)
C280 Marine Engines Diesel Exhaust Fluid Tank