Auxiliary Water Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9895 | Crossblock | 1 |
1P-0820 | Hydraulic Puller | 1 | |
126-7181 | Sliding Plate | 2 | |
3H-0465 | Push-Puller Plate | 6 | |
2S-4680 | Stud | 2 | |
3S-6224 | Electric Hydraulic Pump Gp | 1 | |
2L-4523 | Bolt | 2 | |
5P-8244 | Hard Washer | 2 | |
6B-6682 | Full Nut | 2 | |
2J-3506 | Full Nut | 2 |
Start By:
- Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
- Remove nuts (1). Remove cover (2) from water pump (3).
Show/hide table
Illustration 2 g01204935 - Remove O-ring seal (4) from cover (2).
Show/hide table
Illustration 3 g01207677 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) in order to remove impeller (5).
Show/hide table
Illustration 4 g01207696 - Turn over water pump (3). Remove bolts (8). Remove shaft (7) and thrust washer (9). When you remove shaft (7) the seal ring will be free from shaft (7).
Show/hide table
Illustration 5 g01207698 - Remove seal (10) and ring assembly (11).
Show/hide table
Illustration 6 g06095514 - Turn over water pump (3). Remove seal assembly (12).
Show/hide table
Illustration 1 | g01204934 |
Caterpillar Information System:
Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225} Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225}
C175-16 and C175-20 Locomotive Engines Water Pump - Assemble
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270} New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
C175-16 and C175-20 Locomotive Engines Water Pump - Disassemble
C175-16 Locomotive Engine Engine Operation
C175-16 Marine Propulsion Engines Fuel System Verification - Test
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Is High
C175-16 and C175-20 Locomotive Engines Flywheel Housing - Install
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Remove
C175-20 Locomotive Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C175-16 Locomotive Engine Emergency Stopping
C175-20 Locomotive Engine Before Starting Engine
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Install
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
TR35 Locomotive Transmission Transmission Oil Pump - Disassemble
TR35 Locomotive Transmission Transmission Oil Pump - Assemble
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Remove
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217} A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Is Noisy
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Install
SPF343 and SPF343C Trailer Mounted Pumpers Model View Illustrations
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install