Flywheel Housing - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 439-3940 | Link Bracket | 2 |
- Use Tooling (A) and a suitable lifting device to position flywheel housing (24). The weight of flywheel housing (24) is approximately
726 kg (1600 lb) .Show/hide tableIllustration 2 g01220583 - Install bolts (25) that connect the oil pan to flywheel housing (24).
Show/hide table
Illustration 3 g06092055 - Install bolts (26) remove Tooling (A) from flywheel housing (24).
Show/hide table
Illustration 4 g06092043 - Install crankshaft position sensor (21), bolts (20), and connect harness assembly (22).
Show/hide table
Illustration 5 g06092035 - Install cover (19), bolts (17), and connect harness assembly (18).
Show/hide table
Illustration 6 g06092030 - Connect tube assembly (16).
Show/hide table
Illustration 7 g06092027 - Install cam gear (15) and bolts (14).
Show/hide table
Illustration 8 g06092002 - Install cover (13), bolts (12), cover (10), bolts (11), and seals (9).
Show/hide table
Illustration 9 g06091852 - Use a suitable lifting device to position turbo support (1). The weight of turbo support is approximately
191 kg (421 lb) . - Install bolts (3), bolt (8), and position harness assembly (4).
- Position line (7), install bolts (5), and hose assembly (6).
- Connect hose assembly (2).
Show/hide table
Illustration 1 | g06092047 |
End By:
- Install the crankshaft rear seal.
- Install the aftercooler.
- Install the starters.
- Install the turbo chargers.
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Remove
C175-20 Locomotive Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C175-16 Locomotive Engine Emergency Stopping
C175-20 Locomotive Engine Before Starting Engine
C175-20 Locomotive Engine Plate Locations and Film Locations
G3500B Engines Fuel System Operation
323F SA and 323F LN Excavator Diesel Exhaust Fluid Filter - Replace
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620} New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Level Is Low
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Alternator Problem - Charging Problem and/or Noisy Operation
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
C175-16 and C175-20 Locomotive Engines Engine Oil Filter Housing - Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Coolant Temperature Is High
C175-16 Marine Propulsion Engines Fuel System Verification - Test
C175-16 Locomotive Engine Engine Operation
C175-16 and C175-20 Locomotive Engines Water Pump - Disassemble
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270} New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
C175-16 and C175-20 Locomotive Engines Water Pump - Assemble
Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225} Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225}
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Install
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
TR35 Locomotive Transmission Transmission Oil Pump - Disassemble
TR35 Locomotive Transmission Transmission Oil Pump - Assemble