Service Cylinder Head Assemblies Have Round Exhaust Ports{1100,1101}
Usage:
3406, 3406B, 3406C Truck Engines
The part service 110-5096, 110-5097, and 115-2364 Cylinder Head Assemblies have round exhaust ports. EITHER round or rectangular port exhaust manifolds can be used with these round port cylinder heads. But, a round port exhaust manifold can NOT be used with a rectangular port cylinder head.
NOTE: When installing a rectangular port exhaust manifold on a round port cylinder head, use the appropriate rectangular port exhaust manifold gasket.
Caterpillar Information System:
1995/07/01 Adapter Ring Required For 6-0799 Exhaust Restrictor Group{1050}
1995/06/01 Finding Top Dead Center (TDC) For Setting Valve Lash{0374}
1995/06/01 New Bolts With "Lock-Patch" Used In Front Timing Gear Groups{1206}
1995/05/01 Special Instruction Available For New Dedicated Power Take-Off (PTO){1900,1165}
1995/05/01 New Rear Power Take-Off (RPTO) Has 1.3:1 Ratio{1165}
1995/05/01 Requirement For FLASH Programming Capability{1900,1901}
1995/04/01 Air Compressor Installation Procedure{1803}
1995/04/01 124-5572 Air Pressure Relief Valve Available{1803}
1995/04/01 Handling Electronic Unit Injectors (EUI){1290}
1995/04/01 New Needle Valve Body Corrects Low Idle Surge{1264}
1995/04/01 Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01 Tampering With Turbocharger Wastegate{1057,1052}
1995/07/01 Inspection Of Valve Guide Seals{1104}
1995/07/01 New Jake Brake Factory Setting{1119}
1995/07/01 Proper Method For Cleaning Anodized-Coated Aluminum Pistons{1214}
1995/07/01 New Standpipe Installed On Water Pumps{1361}
1995/07/01 Caterpillar Long Life Coolant/Antifreeze Identification{1395}
1995/08/01 Operation And Troubleshooting Of Catalytic Converter/Mufflers{1091,1062}
1995/08/01 Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/01 Piston Usage Chart For Two Piece Pistons{1214}
1995/08/01 Adapter Ring May Be Required For Some 6I-0799 Exhaust Restrictor Group Installations{1050}
1995/08/01 New Thicker Exhaust Manifold Gasket Used{1059}
1995/08/01 New Indication Of Upper End Check{1102,1290}
1995/08/01 New And Reconditioned Valve Projection Specifications{1105}