Throttle Control Valve - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 4 |
- Attach Tooling (A) and a suitable lifting device to throttle (1).
- Position the gasket and throttle (1). The weight of throttle (1) is approximately
23 kg (51 lb) . - Install the washers and bolts (2).
- Install the new O-ring seal on elbow (4). Install elbow (4) into adapter (5).
- Install the washers and bolts (3).
- Connect the harness assembly.
- Turn the mode switch to ON for the gas supply.
Show/hide table
Illustration 1 | g01699778 |
End By:
- Install the fuel control actuator. Refer to Disassembly and Assembly, "Fuel Control Actuator - Remove and Install".
Caterpillar Information System:
C15 Petroleum Engines Timing - Calibrate
G3516 Petroleum Engines Throttle Control Valve - Remove
C18 Fire Pump Industrial Engine Heat Exchanger - Disassemble
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
2009/02/16 New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
C175 Generator Sets Fuel System - Prime
C18 Fire Pump Industrial Engine Heat Exchanger - Install
3612 and 3616 Engines Air Shutoff
G3500B Engines Electrical Connectors
C18 Fire Pump Industrial Engine Heat Exchanger - Remove
C18 Fire Pump Industrial Engine Expansion Tank - Remove and Install
C18 Fire Pump Industrial Engine Air Cleaner - Remove and Install
Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M} Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M}
3500 Generator Sets Zinc Rods - Inspect/Replace
3000 Frame SR5 Electric Power Generation Terminal Box - Remove and Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Vibration Damper
C175 Generator Sets Engine Operation
C175 Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
2008/10/27 Replace the Two-Piece Piston if the Piston Contacts a Valve {1225}
3612 and 3616 Engines Piston and Rings - Three Ring Piston
3512, 3508 and 3516 Generator Sets Safety Messages
3500 Generator Sets Safety Messages
120K Motor Grader Backup Alarm
C18 Fire Pump Industrial Engine Heat Exchanger - Assemble