Speed Sensor (Transmission) - Engine Output
Show/hide table
 | |
| Illustration 1 | g01714513 |
(1) Tighten the sensor to the following torque. ... 25 ± 5 N·m (18 ± 4 lb ft)
Operating temperature range ... −40° to 120°C (−40° F to 248°F)
Max operating frequency ... 40 kHz
Caterpillar Information System:
2009/02/16 New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
C175 Generator Sets Fuel System - Prime
C18 Fire Pump Industrial Engine Heat Exchanger - Install
3612 and 3616 Engines Air Shutoff
G3500B Engines Electrical Connectors
C18 Fire Pump Industrial Engine Heat Exchanger - Remove
C18 Fire Pump Industrial Engine Expansion Tank - Remove and Install
C18 Fire Pump Industrial Engine Air Cleaner - Remove and Install
C18 Fire Pump Industrial Engine Alternator - Remove and Install
G3516 Petroleum Engines Fuel Control Actuator - Remove and Install
C18 Fire Pump Industrial Engine Electronic Control Module - Remove and Install
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
C18 Fire Pump Industrial Engine Heat Exchanger - Disassemble
G3516 Petroleum Engines Throttle Control Valve - Remove
C15 Petroleum Engines Timing - Calibrate
G3516 Petroleum Engines Throttle Control Valve - Install
Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M} Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M}
3500 Generator Sets Zinc Rods - Inspect/Replace
3000 Frame SR5 Electric Power Generation Terminal Box - Remove and Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Vibration Damper
C175 Generator Sets Engine Operation
C175 Generator Sets Electronic Modular Control Panel 3 (EMCP 3)
2008/10/27 Replace the Two-Piece Piston if the Piston Contacts a Valve {1225}
3612 and 3616 Engines Piston and Rings - Three Ring Piston