Heat Exchanger - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
- Attach Tooling (A) and a suitable lifting device onto the heat exchanger. The weight of the heat exchanger is approximately 64 kg (140 lb). Position the heat exchanger onto the engine.
Show/hide table
Illustration 1 | g01697533 |
- Install U-bolts (4) hand tight.
Show/hide table
Illustration 2 | g01697036 |
- Connect tube assemblies (2) and connect clamp assemblies (1) .
- Connect hoses (3) onto heat exchanger (5) .
- Tighten U-bolts (4) .
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Caterpillar Information System:
3612 and 3616 Engines Air Shutoff
G3500B Engines Electrical Connectors
C18 Fire Pump Industrial Engine Heat Exchanger - Remove
C18 Fire Pump Industrial Engine Expansion Tank - Remove and Install
C18 Fire Pump Industrial Engine Air Cleaner - Remove and Install
C18 Fire Pump Industrial Engine Alternator - Remove and Install
G3516 Petroleum Engines Fuel Control Actuator - Remove and Install
C18 Fire Pump Industrial Engine Electronic Control Module - Remove and Install
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
2008/12/15 A New Pressure Gauge Is Now Used. {7456}
2008/10/27 A New Heat Shield for the Exhaust Manifold is Available {1067}
C6.6 Marine Generator Set Engine Design
C175 Generator Sets Fuel System - Prime
2009/02/16 New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
C18 Fire Pump Industrial Engine Heat Exchanger - Disassemble
G3516 Petroleum Engines Throttle Control Valve - Remove
C15 Petroleum Engines Timing - Calibrate
G3516 Petroleum Engines Throttle Control Valve - Install
Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M} Information for the New Flame Detection Temperature Sensors{108B, 108E, 108M}
3500 Generator Sets Zinc Rods - Inspect/Replace
3000 Frame SR5 Electric Power Generation Terminal Box - Remove and Install
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Vibration Damper
C175 Generator Sets Engine Operation