A New Pressure Gauge Is Now Used. {7456}
- Marine Engine:
- C32 MARINE (S/N: RNC1-UP; T3T1-UP)
Description of Change: A new pressure gauge is now used on the engines that are listed above. The new pressure gauge has a 1034 kPa (150 psi) pressure range.
Show/hide table
 | |
| Illustration 1 | g01708595 |
(1) Pressure Gauge | |
Adaptable To: The new 336-7741 Pressure Gauge replaces the current 4W-0506 Pressure Gauge on the 168-4420 Instrument Panel Gp .
The change is effective at the factory with the engine serial number T3T00320-UP.
Caterpillar Information System:
2008/10/27 A New Heat Shield for the Exhaust Manifold is Available {1067}
C6.6 Marine Generator Set Engine Design
C18 Fire Pump Industrial Engine Turbocharger Outlet Pressure Sensor - Remove and Install
3512B SR4B Generator Sets Radiator - Clean
C18 Fire Pump Industrial Engine Inlet Air Temperature Sensor - Remove and Install
PM3516 Power Modules Refill Capacities and Recommendations
2009/01/26 Improved Fuel Injection Pump Timing Tool {1251}
C18 Fire Pump Industrial Engine Valve Mechanism Cover - Remove and Install
C18 Fire Pump Industrial Engine Housing (Front) - Install
C18 Fire Pump Industrial Engine Housing (Front) - Remove
3516C HD Generator Set with Gearbox Emergency Stopping
TH55FT-E70 and TH55FT-E90 Transmissions Breather (Transmission) - Clean
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
C18 Fire Pump Industrial Engine Electronic Control Module - Remove and Install
G3516 Petroleum Engines Fuel Control Actuator - Remove and Install
C18 Fire Pump Industrial Engine Alternator - Remove and Install
C18 Fire Pump Industrial Engine Air Cleaner - Remove and Install
C18 Fire Pump Industrial Engine Expansion Tank - Remove and Install
C18 Fire Pump Industrial Engine Heat Exchanger - Remove
G3500B Engines Electrical Connectors
3612 and 3616 Engines Air Shutoff
C18 Fire Pump Industrial Engine Heat Exchanger - Install
C175 Generator Sets Fuel System - Prime
2009/02/16 New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}