Improved Fuel Injection Pump Timing Tool {1251}
- Engine:
- C4.4 (S/N: 4441-UP)
- Generator Set:
- C4.4 (S/N: D4B1-UP)
- C6.6 (S/N: 6661-UP)
- C4.4 (S/N: D4D1-UP)
- C6.6 (S/N: SDA1-UP)
- C6.6 (S/N: N6D1-UP)
- C4.4 (S/N: GLD1-UP; GLE1-UP)
Description of Change: An improved fuel injection pump timing tool has been introduced. The new fuel injection pump timing tool has spring washers and improved tolerances.
Adaptable To: The improved 338-1054 Tool Gp-Pump Tmg replaces 278-2639 Tool Gp-Pump Tmg .
The 278-2639 Tool Gp-Pump Tmg should be returned to the Dealer Service Tools for replacement.
Caterpillar Information System:
C18 Fire Pump Industrial Engine Valve Mechanism Cover - Remove and Install
C18 Fire Pump Industrial Engine Housing (Front) - Install
C18 Fire Pump Industrial Engine Housing (Front) - Remove
3516C HD Generator Set with Gearbox Emergency Stopping
TH55FT-E70 and TH55FT-E90 Transmissions Breather (Transmission) - Clean
R250 Automatic Voltage Regulator Remote Voltage Control
R250 Automatic Voltage Regulator Voltage - Adjust
R250 Automatic Voltage Regulator Stability - Adjust
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230} Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
3516C Generator Sets Configuration Parameters
G3516 Petroleum Engines Crankcase Breather - Remove and Install
2008/10/01 A New Fuel Enable Valve Is Now Used {5479}
PM3516 Power Modules Refill Capacities and Recommendations
C18 Fire Pump Industrial Engine Inlet Air Temperature Sensor - Remove and Install
3512B SR4B Generator Sets Radiator - Clean
C18 Fire Pump Industrial Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C6.6 Marine Generator Set Engine Design
2008/10/27 A New Heat Shield for the Exhaust Manifold is Available {1067}
2008/12/15 A New Pressure Gauge Is Now Used. {7456}
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
C18 Fire Pump Industrial Engine Electronic Control Module - Remove and Install
G3516 Petroleum Engines Fuel Control Actuator - Remove and Install
C18 Fire Pump Industrial Engine Alternator - Remove and Install
C18 Fire Pump Industrial Engine Air Cleaner - Remove and Install