A New Fuel Enable Valve Is Now Used {5479}
- Engine:
- C13 (S/N: LEE1-UP)
- C15 (S/N: SDP1-UP; B5R1-UP)
- C7 (S/N: C7S1-UP)
- C9 (S/N: MFF1-UP; C9S1-UP)
Description of Change:
A new fuel enable valve is now used for the aftertreatment regeneration device (ARD).
Adaptable To: The new fuel enable valve is a direct replacement of the former valve. Use the new fuel enable valve on engines that are equipped with a heated nozzle for the ARD combustion head. Refer to Table 1.
Show/hide table
Information for the Fuel Enable Valves     | ||||
    | Configuration of the ARD     | New Fuel Enable Valve     | Former Fuel Enable Valve     | Comment     |
C13 and C15     | Heated Nozzle     | 317-1105     | 300-0510     | Diagnostic codes for low fuel pressure for the ARD will occur if the 317-1105 Solenoid Valve Gp is used on an engine that is equipped with an air purge.     |
Air Purge | 300-0510     | 300-0510     | ||
C7 and C9     |     | 317-1105     | 300-0510     | Either fuel enable valve may be used.     |
Caterpillar Information System:
TH55FT-E70 and TH55FT-E90 Transmissions Safety Messages
3500B Generator Sets Safety Messages
G3516 Petroleum Engines Vibration Damper - Remove and Install
TH55FT-E70 and TH55FT-E90 Transmissions Lifting and Tying Down the Transmission
2008/10/20 EERP1000 Support CD for the PL1000E and PL1000T {7606, 7620}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Install
G3516 Petroleum Engines Engine Oil Pan - Assemble
G3516 Petroleum Engines Engine Oil Pan - Disassemble
Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Remove
R250 Automatic Voltage Regulator Load Acceptance Module - Adjust
Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317} Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317}
G3516 Petroleum Engines Crankcase Breather - Remove and Install
3516C Generator Sets Configuration Parameters
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230} Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
R250 Automatic Voltage Regulator Stability - Adjust
R250 Automatic Voltage Regulator Voltage - Adjust
R250 Automatic Voltage Regulator Remote Voltage Control
TH55FT-E70 and TH55FT-E90 Transmissions Breather (Transmission) - Clean
3516C HD Generator Set with Gearbox Emergency Stopping
C18 Fire Pump Industrial Engine Housing (Front) - Remove
C18 Fire Pump Industrial Engine Housing (Front) - Install
C18 Fire Pump Industrial Engine Valve Mechanism Cover - Remove and Install
2009/01/26 Improved Fuel Injection Pump Timing Tool {1251}