Emergency Stopping
Show/hide table
注意 |
---|
紧急停机控制装置只用于紧急情况。 切勿把紧急停机装置或控制装置用于正常的停机过程。 |
确保发动机停机后,辅助发动机运行的外部系统的所有部件安全可靠。
Show/hide table
图 1 | g01692233 |
紧急停机按钮位于电子模块控制面板 3(EMCP 3)的表面上。 |
Show/hide table
注意 |
---|
在找到迫使发动机紧急停机的问题并予以纠正以前,不要起动发动机。 |
使用紧急停机功能会切断燃油。 重新起动发动机前可能有必要使紧急停机按钮复位。
重新起动发动机前必须断开并重新接通 ECM 的电源。
Caterpillar Information System:
TH55FT-E70 and TH55FT-E90 Transmissions Breather (Transmission) - Clean
R250 Automatic Voltage Regulator Remote Voltage Control
R250 Automatic Voltage Regulator Voltage - Adjust
R250 Automatic Voltage Regulator Stability - Adjust
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230} Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
3516C Generator Sets Configuration Parameters
G3516 Petroleum Engines Crankcase Breather - Remove and Install
2008/10/01 A New Fuel Enable Valve Is Now Used {5479}
TH55FT-E70 and TH55FT-E90 Transmissions Safety Messages
3500B Generator Sets Safety Messages
G3516 Petroleum Engines Vibration Damper - Remove and Install
TH55FT-E70 and TH55FT-E90 Transmissions Lifting and Tying Down the Transmission
C18 Fire Pump Industrial Engine Housing (Front) - Remove
C18 Fire Pump Industrial Engine Housing (Front) - Install
C18 Fire Pump Industrial Engine Valve Mechanism Cover - Remove and Install
2009/01/26 Improved Fuel Injection Pump Timing Tool {1251}
PM3516 Power Modules Refill Capacities and Recommendations
C18 Fire Pump Industrial Engine Inlet Air Temperature Sensor - Remove and Install
3512B SR4B Generator Sets Radiator - Clean
C18 Fire Pump Industrial Engine Turbocharger Outlet Pressure Sensor - Remove and Install
C6.6 Marine Generator Set Engine Design
2008/10/27 A New Heat Shield for the Exhaust Manifold is Available {1067}
2008/12/15 A New Pressure Gauge Is Now Used. {7456}
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}