Load Acceptance Module - Adjust
Show/hide table
 | |
| Illustration 1 | g01683233 |
R250 selector switch | |
Note: Positions 7 and 8 of the selector switch are not used on Caterpillar generator sets.
The parameters for the Load Acceptance Module LAM are selected using the selector switch located on the R250 AVR. Use table 1 in order to select the operating parameters of the LAM.
Show/hide table
| Operating Frequency | 50 Hz | 60 Hz | ||
| Switch Position | 1 | 2 | 4 | 5 |
| Voltage Reduction | 13% | 25% | 13% | 25% |
Show/hide table
| NOTICE |
|---|
Care must be taken to correctly select the switch position with respect to the nominal generator set operating frequency (50 or 60 Hz). |
Caterpillar Information System:
Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317} Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317}
2008/10/20 Glow Plugs {1412}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Prelubrication Oil Pump - Remove and Install
G3516 Petroleum Engines Thermostatic Valve - Install
G3516 Petroleum Engines Thermostatic Valve - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Install
C18 Fire Pump Industrial Engine Vibration Damper and Pulley - Remove and Install
C18 Fire Pump Industrial Engine Flywheel - Install - Adapter
TH31-E61 and TH35-E81 Petroleum Transmissions Safety Messages
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Remove
C175-16 Petroleum Generator Set Engines Safety Messages
Updating Engines that are Equipped with a Heated Nozzle for the Caterpillar Regeneration System (CRS){108B, 108E, 108M} Updating Engines that are Equipped with a Heated Nozzle for the Caterpillar Regeneration System (CRS){108B, 108E, 108M}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Remove
Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
G3516 Petroleum Engines Engine Oil Pan - Disassemble
G3516 Petroleum Engines Engine Oil Pan - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Install
2008/10/20 EERP1000 Support CD for the PL1000E and PL1000T {7606, 7620}
TH55FT-E70 and TH55FT-E90 Transmissions Lifting and Tying Down the Transmission
G3516 Petroleum Engines Vibration Damper - Remove and Install
3500B Generator Sets Safety Messages
TH55FT-E70 and TH55FT-E90 Transmissions Safety Messages
2008/10/01 A New Fuel Enable Valve Is Now Used {5479}
G3516 Petroleum Engines Crankcase Breather - Remove and Install