Thermostatic Valve - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect the supply line to the auxiliary water pump. Plug all openings immediately.
Show/hide table
Illustration 1 g01687714 - Remove clamps (3).
- Remove bolts (1). Remove thermostatic valve (4) and bracket (2).
Show/hide table
Illustration 2 g01252049 - Remove bolts (5) and separate thermostatic valve (4) from bracket (2).
Caterpillar Information System:
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Install
C18 Fire Pump Industrial Engine Vibration Damper and Pulley - Remove and Install
C18 Fire Pump Industrial Engine Flywheel - Install - Adapter
TH31-E61 and TH35-E81 Petroleum Transmissions Safety Messages
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Remove
C175-16 Petroleum Generator Set Engines Safety Messages
Updating Engines that are Equipped with a Heated Nozzle for the Caterpillar Regeneration System (CRS){108B, 108E, 108M} Updating Engines that are Equipped with a Heated Nozzle for the Caterpillar Regeneration System (CRS){108B, 108E, 108M}
C18 Fire Pump Industrial Engine Flywheel - Remove - Adapter
C18 Fire Pump Industrial Engine Engine Support (Front) - Remove and Install
C18 Fire Pump Industrial Engine Water Temperature Regulator Housing - Remove and Install
R250 Automatic Voltage Regulator Knee Frequency - Adjust - For Constant Volts Per Hertz Operation
C175-16 Petroleum Generator Set Engines Engine Oil and Filter - Change
G3516 Petroleum Engines Thermostatic Valve - Install
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Prelubrication Oil Pump - Remove and Install
2008/10/20 Glow Plugs {1412}
Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317} Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317}
R250 Automatic Voltage Regulator Load Acceptance Module - Adjust
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Remove
Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
G3516 Petroleum Engines Engine Oil Pan - Disassemble
G3516 Petroleum Engines Engine Oil Pan - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Install
2008/10/20 EERP1000 Support CD for the PL1000E and PL1000T {7606, 7620}
TH55FT-E70 and TH55FT-E90 Transmissions Lifting and Tying Down the Transmission