Engine Oil Pan - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the engine oil from the engine into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Engine Oil - Change".
Show/hide table
Illustration 1 g00590117 - Remove bolts (1) that hold the adapter of the engine oil pump to the engine oil pan.
Show/hide table
Illustration 2 g01776934 - Remove bolts (2) that hold engine oil pan (3) to the engine.
- Lift the engine off the engine oil pan.
- The weight of engine is approximately
6440 kg (14200 lb) . - The weight of oil pan is approximately
368 kg (809 lb) .
Caterpillar Information System:
R250 Automatic Voltage Regulator Load Acceptance Module - Adjust
Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317} Procedure to Update the Open Crankcase Ventilation System on C13 and C15 Engines{1074, 1120, 1317}
2008/10/20 Glow Plugs {1412}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Prelubrication Oil Pump - Remove and Install
G3516 Petroleum Engines Thermostatic Valve - Install
G3516 Petroleum Engines Thermostatic Valve - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Install
C18 Fire Pump Industrial Engine Vibration Damper and Pulley - Remove and Install
C18 Fire Pump Industrial Engine Flywheel - Install - Adapter
TH31-E61 and TH35-E81 Petroleum Transmissions Safety Messages
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Turbocharger - Remove
C175-16 Petroleum Generator Set Engines Safety Messages
Updating the Certification Label for China{7557} Updating the Certification Label for China{7557}
G3516 Petroleum Engines Engine Oil Pan - Disassemble
G3516 Petroleum Engines Engine Oil Pan - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Pan - Install
2008/10/20 EERP1000 Support CD for the PL1000E and PL1000T {7606, 7620}
TH55FT-E70 and TH55FT-E90 Transmissions Lifting and Tying Down the Transmission
G3516 Petroleum Engines Vibration Damper - Remove and Install
3500B Generator Sets Safety Messages
TH55FT-E70 and TH55FT-E90 Transmissions Safety Messages
2008/10/01 A New Fuel Enable Valve Is Now Used {5479}
G3516 Petroleum Engines Crankcase Breather - Remove and Install
3516C Generator Sets Configuration Parameters