Air Cleaner - Remove and Install
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen clamp (2) .
Show/hide table
Illustration 1 | g01696033 |
- Remove air cleaner element (1) and the adapter (not shown).
- Loosen both clamp assemblies (4) and remove tube assembly (3) .
- Remove elbow (5) .
Installation Procedure
- Position elbow (5) and tube assembly (3) onto the engine.
Show/hide table
Illustration 2 | g01696033 |
- Tighten clamp assemblies (4) .
- Position air cleaner element (1) and the adapter (not shown) onto the engine.
- Tighten clamp assembly (2) .
Caterpillar Information System:
C18 Fire Pump Industrial Engine Alternator - Remove and Install
G3516 Petroleum Engines Fuel Control Actuator - Remove and Install
C18 Fire Pump Industrial Engine Electronic Control Module - Remove and Install
Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450} Winding Insulation Maintenance and Cleaning and Drying of the Generators {4450}
2008/12/15 A New Pressure Gauge Is Now Used. {7456}
2008/10/27 A New Heat Shield for the Exhaust Manifold is Available {1067}
C6.6 Marine Generator Set Engine Design
C18 Fire Pump Industrial Engine Turbocharger Outlet Pressure Sensor - Remove and Install
3512B SR4B Generator Sets Radiator - Clean
C18 Fire Pump Industrial Engine Inlet Air Temperature Sensor - Remove and Install
PM3516 Power Modules Refill Capacities and Recommendations
2009/01/26 Improved Fuel Injection Pump Timing Tool {1251}
C18 Fire Pump Industrial Engine Expansion Tank - Remove and Install
C18 Fire Pump Industrial Engine Heat Exchanger - Remove
G3500B Engines Electrical Connectors
3612 and 3616 Engines Air Shutoff
C18 Fire Pump Industrial Engine Heat Exchanger - Install
C175 Generator Sets Fuel System - Prime
2009/02/16 New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
TH48-E70 Petroleum Transmission and TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train Packages Speed Sensor (Transmission) - Engine Output
C18 Fire Pump Industrial Engine Heat Exchanger - Disassemble
G3516 Petroleum Engines Throttle Control Valve - Remove
C15 Petroleum Engines Timing - Calibrate
G3516 Petroleum Engines Throttle Control Valve - Install